Volvo Volvo C70 2006-2013 Fuel System Bolt Torque Specifications & Line Fittings
Volvo Volvo C70 2006-2013

Volvo Volvo C70 2006-2013 Fuel System Bolt Torque Specifications

Detailed torque specifications for the fuel system bolts on the 2006-2013 Volvo C70, including fuel rail, fuel pump, and fuel line connections.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

Fuel Delivery System

Components responsible for delivering fuel from the tank to the engine, including the fuel rail, injectors, and high-pressure lines.

1

Fuel Rail Bolts

M6 x 1.0
Torque Value
8 ft-lbs (11 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute pressure.
2

Fuel Injector Bolts

M6 x 1.0
Torque Value
8 ft-lbs (11 N·m)
Important Notes
Ensure injectors are properly seated before tightening.
3

High-Pressure Fuel Line Fittings

M8 x 1.25
Torque Value
18 ft-lbs (24 N·m)
Important Notes
Ensure fittings are clean and free of debris before installation.

Fuel Storage System

Components responsible for storing and securing fuel, including the fuel tank, straps, and filler neck.

1

Fuel Pump Mounting Bolts

M8 x 1.25
Torque Value
18 ft-lbs (24 N·m)
Important Notes
Ensure the fuel pump is properly seated in the tank before tightening.
2

Fuel Tank Strap Bolts

M10 x 1.5
Torque Value
22 ft-lbs (30 N·m)
Important Notes
Ensure the fuel tank is properly aligned before tightening.
3

Fuel Filler Neck Bolts

M8 x 1.25
Torque Value
22 ft-lbs (30 N·m)
Important Notes
Ensure the filler neck is properly aligned with the fuel tank.
4

Fuel Tank Sender Unit Bolts

M6 x 1.0
Torque Value
18 ft-lbs (24 N·m)
Important Notes
Ensure the sender unit is properly seated before tightening.

Fuel Filtration System

Components responsible for filtering fuel, including the fuel filter and its housing.

1

Fuel Filter Bolt/Nut

M8 x 1.25
Torque Value
25 ft-lbs (34 N·m)
Important Notes
Ensure the filter housing is properly aligned before tightening.

Fuel Line Securing System

Components responsible for securing fuel lines to the chassis or other components.

1

Fuel Line Clamp Bolts

M6 x 1.0
Torque Value
8 ft-lbs (11 N·m)
Important Notes
Ensure the fuel lines are properly routed before tightening.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What is the recommended torque specification for the fuel rail bolts on a 2006-2013 Volvo C70?

The recommended torque specification for the fuel rail bolts on a 2006-2013 Volvo C70 is 8-10 Nm (6-7 lb-ft). Over-tightening can damage the fuel rail or injectors, while under-tightening may cause fuel leaks.

Q2

How often should I check the torque on the fuel system components?

It is recommended to check the torque on fuel system components, such as the fuel rail bolts, during routine maintenance or if you notice symptoms of a fuel leak. Always re-torque after any repair or disassembly of the fuel system.

Q3

Can I reuse the fuel rail bolts after removal?

While reusing fuel rail bolts is generally acceptable, it is best practice to replace them if they show signs of wear, corrosion, or stretching. Always ensure the bolts are clean and undamaged before reinstallation.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Torque Wrench

A precision tool used to apply a specific torque to a fastener, such as fuel system bolts.

  • Adjustable torque settings
  • Calibrated for accuracy
Learn more

Fuel Line Disconnect Tool

A tool designed to safely disconnect fuel lines without damaging the connectors.

  • Compatible with Volvo fuel line connectors
  • Ergonomic design for ease of use
Learn more

Socket Set

A set of sockets in various sizes, including those required for fuel system components.

  • Includes metric sizes
  • Durable construction
Learn more
Service Procedures

Fuel Rail Bolt Torque Specification

Procedure to apply the correct torque to fuel rail bolts on a 2006-2013 Volvo C70.

  • Disconnect the negative battery cable to ensure safety.
  • Remove the engine cover to access the fuel rail.
  • Use a fuel line disconnect tool to detach the fuel lines from the rail.
  • Loosen and remove the fuel rail bolts using the appropriate socket.
  • Clean the bolt threads and apply a small amount of thread locker if specified.
  • Reinstall the fuel rail and hand-tighten the bolts.
  • Use a torque wrench to tighten the bolts to the specified torque value (e.g., 10 Nm).
  • Reconnect the fuel lines and ensure they are securely attached.
  • Reinstall the engine cover and reconnect the battery cable.
View full procedure

Fuel Pump Mounting Bolt Torque Specification

Procedure to apply the correct torque to fuel pump mounting bolts on a 2006-2013 Volvo C70.

  • Disconnect the negative battery cable to ensure safety.
  • Remove the rear seat cushion to access the fuel pump cover.
  • Disconnect the electrical connector and fuel lines from the fuel pump.
  • Remove the fuel pump cover and carefully extract the fuel pump assembly.
  • Clean the mounting bolt threads and apply a small amount of thread locker if specified.
  • Reinstall the fuel pump assembly and hand-tighten the mounting bolts.
  • Use a torque wrench to tighten the bolts to the specified torque value (e.g., 8 Nm).
  • Reconnect the electrical connector and fuel lines.
  • Reinstall the fuel pump cover and rear seat cushion.
  • Reconnect the battery cable.
View full procedure
Technical Service Bulletins

Fuel System Leak Recall

2012-05-15

A recall issued for potential fuel system leaks in certain 2006-2013 Volvo C70 models.

2006-2013 Volvo C70

Resolution: Inspect the fuel system for leaks and replace any faulty components. Ensure all bolts are torqued to the correct specifications during reassembly.

Fuel Rail Bolt Torque Update

2010-08-20

A service bulletin updating the torque specifications for fuel rail bolts on 2006-2013 Volvo C70 models.

2006-2013 Volvo C70

Resolution: Update the torque specification for fuel rail bolts to 10 Nm and ensure proper installation during service.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

© 2025 Volvo Specs. All rights reserved.

Privacy Policy Terms of Service