Volvo Volvo S60 2010-2018 Body Specifications
Explore the detailed body specifications for the 2010-2018 Volvo S60, including dimensions, materials, and design features. This guide is essential for repairs, upgrades, and understanding the vehicle's structural integrity.
Overview Specifications
This document provides detailed specifications and technical information about the body design and features of the 2010-2018 Volvo S60. It is organized into sections covering exterior dimensions, materials, aerodynamics, and safety features. Use the search functionality to locate specific terms or navigate through sections to explore detailed information about the car's body design.
How to Use
Use the search bar to enter keywords related to body specifications, such as 'dimensions' or 'materials'. Results will highlight relevant sections and subsections for quick access.
Scroll through the document or use the table of contents to jump to specific sections. Each section is divided into subsections with detailed technical points for easy reference.
Key Specifications
Length
182.2 inches
Width
73.4 inches
Height
58.4 inches
Wheelbase
109.3 inches
Drag Coefficient
0.28
Available Specifications
Exterior Dimensions
This section covers the physical measurements of the 2010-2018 Volvo S60, including length, width, height, and wheelbase. It also includes details about ground clearance and weight distribution.
Exterior Dimensions
This section covers the physical measurements of the 2010-2018 Volvo S60, including length, width, height, and wheelbase. It also includes details about ground clearance and weight distribution.
Overall Dimensions
- Length: 182.2 inches
- Width: 73.4 inches
- Height: 58.4 inches
- Wheelbase: 109.3 inches
- Ground clearance: 5.9 inches
- Curb weight: 3,500-3,800 lbs (varies by trim)
Weight Distribution
- Front-to-rear weight ratio: 58:42
- Optimal balance for handling and stability
- Lightweight materials used in construction
- Impact on fuel efficiency and performance
Body Materials
This section details the materials used in the construction of the Volvo S60's body, focusing on durability, weight reduction, and safety. It includes information about high-strength steel, aluminum, and other components.
Body Materials
This section details the materials used in the construction of the Volvo S60's body, focusing on durability, weight reduction, and safety. It includes information about high-strength steel, aluminum, and other components.
High-Strength Steel
- Used in critical safety zones
- Enhances crash protection
- Reduces overall weight
- Improves structural rigidity
Aluminum Components
- Used in hood and door panels
- Reduces weight for better fuel efficiency
- Corrosion-resistant properties
- Maintains structural integrity
Aerodynamics
This section explains the aerodynamic design features of the Volvo S60, including drag coefficient, airflow management, and exterior styling elements that contribute to efficiency and performance.
Aerodynamics
This section explains the aerodynamic design features of the Volvo S60, including drag coefficient, airflow management, and exterior styling elements that contribute to efficiency and performance.
Drag Coefficient
- Drag coefficient (Cd): 0.28
- Optimized for fuel efficiency
- Sleek, streamlined design
- Reduces wind noise at high speeds
Airflow Management
- Active grille shutters for improved airflow
- Underbody panels for reduced turbulence
- Aero-optimized side mirrors
- Impact on highway fuel economy
Safety Features
This section highlights the safety-focused design elements of the Volvo S60's body, including crumple zones, reinforced pillars, and advanced driver-assistance systems integrated into the body structure.
Safety Features
This section highlights the safety-focused design elements of the Volvo S60's body, including crumple zones, reinforced pillars, and advanced driver-assistance systems integrated into the body structure.
Crumple Zones
- Front and rear crumple zones
- Absorbs impact energy during collisions
- Protects passenger cabin
- Engineered for crash test compliance
Reinforced Pillars
- High-strength steel in A, B, and C pillars
- Enhances roof strength in rollovers
- Supports side-impact protection
- Integrated with airbag systems
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Overview
- Type
- Sedan
- Configuration
- 4-door
- Platform
- Volvo P3 platform
- Material
- High-strength steel and aluminum
- Location
- Torslanda, Sweden
Dimensions
- Length
- 182.2 in (4628 mm)
- Width
- 73.4 in (1864 mm)
- Height
- 58.4 in (1484 mm)
- Wheelbase
- 109.3 in (2776 mm)
- Curb Weight
- 3583 lbs (1625 kg)
- Ground Clearance
- 5.9 in (150 mm)
- Trunk Capacity
- 12.0 cu ft (340 L)
Materials
- Frame
- High-strength boron steel
- Hood
- Aluminum
- Doors
- Steel with aluminum reinforcements
- Roof
- Steel with optional panoramic glass
- Bumpers
- Thermoplastic
Features
- Exterior
-
- Aerodynamic design
- LED daytime running lights
- Heated side mirrors
- Rain-sensing wipers
- interior
-
- Leather upholstery
- Dual-zone climate control
- Power-adjustable seats
- Ambient lighting
- Lighting
-
- Bi-Xenon headlights
- LED taillights
- Automatic high beam control
- Cornering lights
- Windows
-
- Power windows with one-touch operation
- Rear window defroster
- Privacy glass (optional)
- Heated windshield (optional)
- Roof
-
- Standard steel roof
- Optional panoramic sunroof
- Roof rails (optional)
Safety Features
- Structural
-
- Energy-absorbing crumple zones
- Reinforced side-impact protection
- Rollover protection system
- Airbags
-
- Front airbags
- Side curtain airbags
- Knee airbags
- Assistance
-
- Blind Spot Information System (BLIS)
- Lane Departure Warning
- Collision Warning with Auto Brake
Comfort Features
- Seating
-
- 8-way power-adjustable driver seat
- 4-way power-adjustable passenger seat
- Heated front seats
- Memory function for driver seat
- Climate
-
- Dual-zone automatic climate control
- Rear-seat ventilation
- Air quality system
- Noise Reduction
-
- Acoustic laminated windshield
- Sound-deadening materials
- Engine noise cancellation
- Storage
-
- Center console storage
- Glove compartment with cooling
- Door pocket storage
Accessories
- Exterior
-
- Roof rack
- Front and rear mud flaps
- Chrome exhaust tip
- interior
-
- All-weather floor mats
- Cargo area protector
- Rear seat entertainment system
- Lighting
-
- LED interior lighting kit
- Fog lights
- Daytime running light upgrade
Maintenance
- Service interval
- 10,000 miles or 12 months
- Service Items
-
- Inspect and clean body panels
- Check and lubricate door hinges
- Inspect windshield wipers
- Check and adjust headlights
- Inspect and clean sunroof (if equipped)
- Maintenance Notes
- Regular washing and waxing recommended to protect paint and prevent rust.
Warranty
- Basic
- Miles: 50,000Years: 4Coverage: Bumper-to-bumper
- Corrosion
- Miles: UnlimitedYears: 12Coverage: Perforation from corrosion
- Powertrain
- Miles: 100,000Years: 5Coverage: Engine, transmission, and drivetrain
- Roadside Assistance
- Miles: UnlimitedYears: 4Coverage: 24/7 roadside assistance
Production Details
- Manufacturer
- Volvo Cars
- Manufacturing Process
-
- Robotic welding
- Electro-coating for rust prevention
- Precision assembly
- Quality Control
- inspection Points: 200+Testing: Crash testing, Weather resistance testing, Durability testing
- Sustainability Practices
-
- Use of recycled materials
- Energy-efficient manufacturing
- Water-based paints
- Production Metrics
- Annual Production: Approximately 100,000 unitsProduction Time: 20 hours per vehicle
Service Information for body Service
Maintenance and service requirements specific to the body of the Volvo S60
- Inspect and clean body panels
- Check and lubricate door hinges
- Inspect windshield wipers
- Check and adjust headlights
- Inspect and clean sunroof (if equipped)
Regular washing and waxing recommended to protect paint and prevent rust.
- Inspect and repair any paint chips
- Check and tighten all body fasteners
- Inspect and clean door seals
- Check and adjust hood and trunk latches
- Inspect and clean sunroof drainage (if equipped)
Special attention to areas prone to rust and corrosion.
- Inspect and repair any body damage
- Check and replace worn door seals
- Inspect and repair any rust spots
- Check and replace windshield wipers
- Inspect and clean sunroof mechanism (if equipped)
Consider professional detailing to maintain exterior finish.
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the technical specifications for the 2010-2018 Volvo S60?
What are the technical specifications for the 2010-2018 Volvo S60?
The 2010-2018 Volvo S60 features a range of engine options, including turbocharged 2.0L 4-cylinder and 3.0L 6-cylinder engines, producing 240-325 horsepower. It offers front-wheel or all-wheel drive configurations, with a 6-speed automatic or 8-speed automatic transmission. The car has a curb weight of 3,500-3,900 lbs, fuel efficiency of 20-30 mpg, and a towing capacity of up to 3,300 lbs. It is compatible with premium fuel and requires synthetic oil for optimal performance.
Q2 What are the maintenance requirements for the 2010-2018 Volvo S60?
What are the maintenance requirements for the 2010-2018 Volvo S60?
The 2010-2018 Volvo S60 requires regular maintenance, including oil changes every 10,000 miles or 12 months, tire rotations every 7,500 miles, and brake inspections every 15,000 miles. The air filter should be replaced every 30,000 miles, and the cabin air filter every 20,000 miles. Spark plugs and coolant should be checked every 60,000 miles. Adhering to the manufacturer's schedule ensures longevity and performance.
Q3 How do I replace the headlight bulb on a 2010-2018 Volvo S60?
How do I replace the headlight bulb on a 2010-2018 Volvo S60?
To replace the headlight bulb on a 2010-2018 Volvo S60, first, open the hood and locate the headlight assembly. Remove the rubber cover behind the headlight. Disconnect the wiring harness, then release the bulb retaining clip. Carefully remove the old bulb and insert the new one, ensuring it is properly seated. Reattach the clip, reconnect the wiring harness, and replace the rubber cover. Test the headlight before closing the hood.
Q4 What should I do if my 2010-2018 Volvo S60 is overheating?
What should I do if my 2010-2018 Volvo S60 is overheating?
If your 2010-2018 Volvo S60 is overheating, first turn off the air conditioning and turn on the heater to dissipate heat. Pull over safely and turn off the engine. Check the coolant level and refill if necessary, ensuring the engine is cool before opening the radiator cap. Inspect for leaks or damaged hoses. If the issue persists, seek professional assistance to diagnose potential thermostat or water pump failures.
Q5 How can I optimize the performance of my 2010-2018 Volvo S60?
How can I optimize the performance of my 2010-2018 Volvo S60?
To optimize the performance of your 2010-2018 Volvo S60, use premium fuel and synthetic oil for better engine efficiency. Regularly check tire pressure and alignment for improved handling. Upgrade to high-performance air filters and spark plugs. Consider a professional ECU tune for enhanced power and throttle response. Maintain a clean fuel system and ensure timely servicing to keep the engine running smoothly.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
2010-2018 Volvo S60 Service Manual
Coming SoonComprehensive guide covering maintenance, repairs, and technical specifications for the 2010-2018 Volvo S60.
Volvo S60 Technical Service Bulletin
Coming SoonLatest updates and fixes for common issues in the 2010-2018 Volvo S60, including software updates and recall information.
Volvo S60 Parts and Accessories Catalog
Coming SoonDetailed catalog of OEM and aftermarket parts and accessories for the 2010-2018 Volvo S60.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.