Volvo Volvo S80 1998-2006 Body Specifications
Explore the detailed body specifications and dimensions for the 1998-2006 Volvo S80, including length, width, height, wheelbase, and curb weight. Ideal for mechanics, enthusiasts, and owners seeking accurate technical data for maintenance, repairs, or upgrades.
Overview Specifications
This document provides detailed specifications and technical information about the body design and features of the 1998-2006 Volvo S80. It is organized into sections covering exterior dimensions, materials, aerodynamics, and safety features. Use the search functionality to find specific terms or navigate through sections to explore detailed information about the car's body design.
How to Use
Use the search bar to enter keywords related to body specifications, such as 'dimensions' or 'materials'. Results will highlight relevant sections and subsections.
Scroll through the document or use the table of contents to jump to specific sections. Each section is divided into subsections with detailed technical points.
Key Specifications
Length
482 cm (189.8 in)
Width
183 cm (72 in)
Height
143 cm (56.3 in)
Drag Coefficient
0.28
Curb Weight
1,550-1,750 kg (3,417-3,858 lbs)
Available Specifications
Exterior Dimensions
This section covers the physical measurements of the 1998-2006 Volvo S80, including length, width, height, and wheelbase. It also includes details about ground clearance and weight distribution.
Exterior Dimensions
This section covers the physical measurements of the 1998-2006 Volvo S80, including length, width, height, and wheelbase. It also includes details about ground clearance and weight distribution.
Overall Dimensions
- Length: 482 cm (189.8 in)
- Width: 183 cm (72 in)
- Height: 143 cm (56.3 in)
- Wheelbase: 279 cm (109.8 in)
- Ground clearance: 15 cm (5.9 in)
- Curb weight: 1,550-1,750 kg (3,417-3,858 lbs)
Weight Distribution
- Front axle weight: 58%
- Rear axle weight: 42%
- Payload capacity: 500 kg (1,102 lbs)
- Gross vehicle weight: 2,050 kg (4,519 lbs)
Body Materials
This section details the materials used in the construction of the Volvo S80's body, including steel, aluminum, and composite materials. It also covers corrosion resistance and structural integrity.
Body Materials
This section details the materials used in the construction of the Volvo S80's body, including steel, aluminum, and composite materials. It also covers corrosion resistance and structural integrity.
Primary Materials
- High-strength steel used in the chassis
- Aluminum for hood and trunk lid
- Composite materials for bumpers
- Galvanized steel for corrosion resistance
Structural Features
- Reinforced safety cage around the passenger compartment
- Energy-absorbing crumple zones
- Side-impact protection beams
- Laminated windshield for added safety
Aerodynamics
This section explains the aerodynamic design of the Volvo S80, including drag coefficient, airflow management, and fuel efficiency improvements.
Aerodynamics
This section explains the aerodynamic design of the Volvo S80, including drag coefficient, airflow management, and fuel efficiency improvements.
Drag Coefficient
- Drag coefficient (Cd): 0.28
- Smooth underbody design for reduced drag
- Aerodynamic side mirrors
- Integrated rear spoiler
Airflow Management
- Optimized front grille design
- Air curtains to reduce turbulence
- Sealed wheel arches
- Rear diffuser for improved stability
Safety Features
This section highlights the safety features integrated into the body design of the Volvo S80, including crash protection, pedestrian safety, and advanced restraint systems.
Safety Features
This section highlights the safety features integrated into the body design of the Volvo S80, including crash protection, pedestrian safety, and advanced restraint systems.
Crash Protection
- Front and rear crumple zones
- Side-impact protection system (SIPS)
- Whiplash Protection System (WHIPS)
- Rollover protection system
Pedestrian Safety
- Deformable hood structure
- Energy-absorbing bumpers
- Raised front bumper for impact dispersion
- Soft-touch materials in critical areas
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Overview
- Type
- Sedan
- Configuration
- 4-door
- Platform
- Volvo P2 platform
- Material
- High-strength steel
- Location
- Sweden
Dimensions
- Length
- 191.9 in (4874 mm)
- Width
- 72.3 in (1836 mm)
- Height
- 56.6 in (1438 mm)
- Wheelbase
- 109.9 in (2791 mm)
- Curb Weight
- 3583 lbs (1625 kg)
- Ground Clearance
- 5.9 in (150 mm)
- Trunk Capacity
- 14.9 cu ft (422 L)
Materials
- Frame
- High-strength steel with reinforced safety cage
- Body Panels
- Galvanized steel with corrosion protection
- Roof
- Steel with optional sunroof
- Windows
- Laminated safety glass
- Bumpers
- Impact-absorbing polypropylene
Features
- Exterior
-
- Aerodynamic design
- Integrated fog lights
- Chrome accents
- Heated side mirrors
- interior
-
- Leather upholstery
- Wood trim accents
- Dual-zone climate control
- Power-adjustable front seats
- Lighting
-
- Halogen headlights
- LED taillights
- Automatic headlight leveling
- Daytime running lights
- Storage
-
- Center console storage
- Glove compartment
- Door pockets
- Rear seat armrest with cupholders
- Convenience
-
- Power windows
- Remote keyless entry
- Cruise control
- Rain-sensing wipers
Safety Features
- Structural
-
- Reinforced safety cage
- Front and rear crumple zones
- Side-impact protection beams
- Airbags
-
- Dual front airbags
- Side curtain airbags
- Front seat side airbags
- Active Safety
-
- Anti-lock braking system (ABS)
- Traction control
- Electronic stability control
- Passive Safety
-
- Seatbelt pretensioners
- Whiplash Protection System (WHIPS)
- Child safety locks
Comfort Features
- Seating
-
- Heated front seats
- Memory function for driver seat
- Adjustable lumbar support
- Climate
-
- Dual-zone automatic climate control
- Rear seat ventilation
- Air quality system
- Noise Reduction
-
- Acoustic laminated windshield
- Sound-deadening materials
- Insulated cabin
- Ergonomics
-
- Tilt and telescopic steering wheel
- Adjustable headrests
- Power-adjustable pedals
Accessories
- Exterior
-
- Roof rack
- Mud flaps
- Chrome exhaust tip
- interior
-
- Cargo net
- Seat covers
- Floor mats
- Technology
-
- Upgraded sound system
- Navigation system
- Bluetooth connectivity
Maintenance
- Service interval
- Every 7500 miles or 12 months
- Service Items
-
- Inspect and lubricate door hinges
- Check and adjust door seals
- Inspect body for corrosion
- Clean and condition leather seats
- Check and tighten body bolts
- Maintenance Notes
- Regular waxing recommended to protect paint. Inspect undercarriage for rust in winter climates.
Warranty
- Basic
- Miles: 50000Years: 4Coverage: Bumper-to-bumper
- Corrosion
- Miles: UnlimitedYears: 12Coverage: Perforation only
- Powertrain
- Miles: 100000Years: 5Coverage: Engine and transmission
- Roadside Assistance
- Miles: UnlimitedYears: 4Coverage: 24/7 assistance
Production Details
- Manufacturer
- Volvo Cars
- Manufacturing Process
-
- Robotic welding
- Electro-coating for corrosion protection
- Precision assembly
- Quality Control
- inspection: 100% visual and mechanical inspectionTesting: Crash testing and durability testingCertification: ISO 9001 certified
- Sustainability Practices
-
- Recyclable materials
- Low-emission paint process
- Energy-efficient manufacturing
- Production Metrics
- Annual Output: 150000 unitsProduction Time: 20 hours per vehicleDefect Rate: Less than 0.5%
Service Information for body Service
Maintenance and service requirements specific to the body
- Inspect and lubricate door hinges
- Check and adjust door seals
- Inspect body for corrosion
- Clean and condition leather seats
- Check and tighten body bolts
Regular waxing recommended to protect paint. Inspect undercarriage for rust in winter climates.
- Inspect and replace weather stripping if needed
- Check alignment of body panels
- Inspect and clean sunroof drainage
- Check and adjust hood latch
- Inspect and tighten all body fasteners
Special attention to areas prone to rust and corrosion.
- Full body inspection for rust and damage
- Replace worn door seals
- Inspect and repair any paint damage
- Check and replace any damaged trim pieces
- Inspect and clean all drainage channels
Consider professional rustproofing if in a high-corrosion area.
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the compatibility specifications for the 1998-2006 Volvo S80?
What are the compatibility specifications for the 1998-2006 Volvo S80?
The 1998-2006 Volvo S80 is compatible with a range of engines, including the 2.4L, 2.5L, 2.9L, and 3.2L variants. It supports both manual and automatic transmissions. The vehicle is designed to meet Euro 3 emission standards and is compatible with standard 15-inch to 17-inch alloy wheels. Always verify compatibility with your specific model year and trim level before purchasing parts or accessories.
Q2 What are the maintenance requirements for the 1998-2006 Volvo S80?
What are the maintenance requirements for the 1998-2006 Volvo S80?
The 1998-2006 Volvo S80 requires regular maintenance, including oil changes every 7,500 miles, air filter replacement every 15,000 miles, and timing belt inspection every 60,000 miles. Brake fluid should be replaced every 2 years, and coolant every 5 years. Regular tire rotations and brake inspections are also recommended to ensure optimal performance and safety.
Q3 How do I replace the headlight bulb on a 1998-2006 Volvo S80?
How do I replace the headlight bulb on a 1998-2006 Volvo S80?
To replace the headlight bulb on a 1998-2006 Volvo S80, first, open the hood and locate the headlight assembly. Remove the rubber cover behind the headlight. Disconnect the electrical connector, then release the bulb retaining clip. Carefully remove the old bulb and insert the new one, ensuring it is properly seated. Reconnect the electrical connector and replace the rubber cover. Test the headlight before closing the hood.
Q4 What should I do if my 1998-2006 Volvo S80 is overheating?
What should I do if my 1998-2006 Volvo S80 is overheating?
If your 1998-2006 Volvo S80 is overheating, first check the coolant level and top it off if necessary. Inspect for leaks in the cooling system, including hoses and the radiator. Ensure the radiator fan is functioning properly. If the issue persists, it may be due to a faulty thermostat, water pump, or head gasket. Seek professional assistance for further diagnosis and repair.
Q5 How can I optimize the performance of my 1998-2006 Volvo S80?
How can I optimize the performance of my 1998-2006 Volvo S80?
To optimize the performance of your 1998-2006 Volvo S80, regularly maintain the engine, transmission, and suspension systems. Use high-quality synthetic oil and ensure proper tire inflation. Upgrade to performance air filters and exhaust systems for improved airflow. Regularly clean the fuel injectors and throttle body. Consider a professional ECU tune for enhanced power and efficiency.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
Volvo S80 Service Manual
Coming SoonComprehensive guide covering maintenance, repair, and troubleshooting for the 1998-2006 Volvo S80.
Volvo S80 Technical Service Bulletin
Coming SoonLatest updates and fixes for common issues in the 1998-2006 Volvo S80.
Volvo S80 Parts Catalog
Coming SoonDetailed catalog of OEM and aftermarket parts for the 1998-2006 Volvo S80.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.