Volvo Volvo V40 2012-2019 Drivetrain Bolt Torque Specifications
Comprehensive torque specifications for the drivetrain components of the 2012-2019 Volvo V40, including axle, transmission, and drive shaft bolts.
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Torque Wrench (3/8" Drive)
Torque Wrench (1/2" Drive)
Angle Gauge
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Torque Calculator
Convert between different torque units
Engine To Transmission
Components that connect the engine to the transmission, ensuring proper alignment and power transfer.
1 Flywheel Bolts
M10 x 1.25
Flywheel Bolts
M10 x 1.25Torque Value
Important Notes
2 Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 1.5
Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 1.5Torque Value
Important Notes
3 Transmission Bellhousing Bolts
M8 x 1.25
Transmission Bellhousing Bolts
M8 x 1.25Torque Value
Important Notes
Transmission
Components related to the transmission, including mounting, fluid management, and connections.
1 Transmission Mounting Bolts
M10 x 1.5
Transmission Mounting Bolts
M10 x 1.5Torque Value
Important Notes
2 Transmission Oil Pan Bolts
M6 x 1.0
Transmission Oil Pan Bolts
M6 x 1.0Torque Value
Important Notes
3 Transmission Drain and Fill Plugs
M12 x 1.5
Transmission Drain and Fill Plugs
M12 x 1.5Torque Value
Important Notes
Driveshaft And Axles
Components that transfer power from the transmission or differential to the wheels.
1 Drive Axle/Half Shaft Bolts
M10 x 1.25
Drive Axle/Half Shaft Bolts
M10 x 1.25Torque Value
Important Notes
2 CV Joint/Axle Nut
M24 x 1.5
CV Joint/Axle Nut
M24 x 1.5Torque Value
Important Notes
3 Propeller/Drive Shaft Bolts
M10 x 1.25
Propeller/Drive Shaft Bolts
M10 x 1.25Torque Value
Important Notes
Differential And Transfer Case
Components related to the differential and transfer case, including mounting and fluid management.
1 Differential Mounting Bolts
M10 x 1.25
Differential Mounting Bolts
M10 x 1.25Torque Value
Important Notes
2 Differential Drain/Fill Plug
M12 x 1.5
Differential Drain/Fill Plug
M12 x 1.5Torque Value
Important Notes
3 Transfer Case Mounting Bolts
M8 x 1.25
Transfer Case Mounting Bolts
M8 x 1.25Torque Value
Important Notes
4 Transfer Case Drain/Fill Plug
M12 x 1.5
Transfer Case Drain/Fill Plug
M12 x 1.5Torque Value
Important Notes
Clutch System
Components related to the clutch system, ensuring proper engagement and disengagement of the drivetrain.
1 Clutch Pressure Plate Bolts
M6 x 1.0
Clutch Pressure Plate Bolts
M6 x 1.0Torque Value
Important Notes
Rear Axle
Components related to the rear axle, ensuring proper power transfer to the rear wheels.
1 Rear Axle Hub Bolts
M10 x 1.25
Rear Axle Hub Bolts
M10 x 1.25Torque Value
Important Notes
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What is the torque specification for the driveshaft bolts on a 2012-2019 Volvo V40?
What is the torque specification for the driveshaft bolts on a 2012-2019 Volvo V40?
The torque specification for the driveshaft bolts on a 2012-2019 Volvo V40 is typically 35 Nm (26 lb-ft) for the front driveshaft bolts and 50 Nm (37 lb-ft) for the rear driveshaft bolts. Always refer to the vehicle's service manual for the exact specifications, as they may vary depending on the model year and drivetrain configuration.
Q2 How often should I check the torque on drivetrain components?
How often should I check the torque on drivetrain components?
It is recommended to check the torque on drivetrain components, such as driveshaft bolts and axle nuts, during routine maintenance or after any work involving these components. For example, after replacing a CV joint or performing a wheel alignment, recheck the torque to ensure proper tightness and safety.
Q3 Can I reuse drivetrain bolts after removal?
Can I reuse drivetrain bolts after removal?
It is generally not recommended to reuse drivetrain bolts, as they are often designed as single-use torque-to-yield bolts. Reusing them can compromise their integrity and lead to failure. Always replace drivetrain bolts with new ones that meet the manufacturer's specifications.
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Torque Wrench
A precision tool used to apply a specific torque to a fastener such as a bolt or nut.
- Adjustable torque settings
- Calibrated for accuracy
Socket Set
A set of sockets in various sizes to fit different bolts and nuts.
- Includes both metric and standard sizes
- Durable construction
Thread Locker
A chemical compound used to secure threaded fasteners.
- Prevents loosening due to vibration
- Available in different strengths
Service Procedures
Drivetrain Bolt Torque Application
Detailed steps for applying the correct torque to drivetrain bolts on a 2012-2019 Volvo V40.
- Ensure the vehicle is on a flat surface and the parking brake is engaged.
- Locate the drivetrain bolts requiring torque application.
- Clean the bolt threads and apply thread locker if specified.
- Using a torque wrench, tighten the bolts to the manufacturer's specified torque settings.
- Double-check the torque settings to ensure accuracy.
Drivetrain Bolt Inspection
Procedure for inspecting drivetrain bolts for wear or damage.
- Visually inspect each bolt for signs of wear, corrosion, or damage.
- Check for any loose bolts and retighten if necessary.
- Replace any bolts that show signs of damage or wear.
Technical Service Bulletins
Drivetrain Bolt Torque Specification Update
2015-06-15Updated torque specifications for drivetrain bolts on 2012-2015 Volvo V40 models.
Resolution: Refer to the updated torque specifications in the service manual and ensure all bolts are tightened to the new values.
Drivetrain Bolt Loosening Issue
2017-03-22Reports of drivetrain bolts loosening over time on 2016-2017 Volvo V40 models.
Resolution: Apply thread locker to the affected bolts and retorque to the specified values.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.