Volvo Volvo V60 2010-2018 Drivetrain Bolt Torque Specifications & Fastener Values
Volvo Volvo V60 2010-2018

Volvo Volvo V60 2010-2018 Drivetrain Bolt Torque Specifications

Detailed drivetrain bolt torque specifications for the 2010-2018 Volvo V60, including transmission, driveshaft, and axle bolts.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

Engine

Bolt torque specifications for engine components, including flywheel, main bearings, connecting rods, and crankshaft pulley/harmonic balancer.

1

Flywheel Bolts

M12 x 1.5
Torque Value
55 ft-lbs (75 N·m)
Important Notes
Securely attach flywheel to crankshaft.
2

Main Bearing Bolts

M10 x 1.25
Torque Value
45 ft-lbs (61 N·m)
Important Notes
Securely attach main bearings to engine block.
3

Connecting Rod Nuts

M8 x 1.25
Torque Value
20 ft-lbs (27 N·m)
Important Notes
Securely attach connecting rods to crankshaft.
4

Crankshaft Pulley/Harmonic Balancer Bolt

M14 x 1.5
Torque Value
118 ft-lbs (160 N·m)
Important Notes
Securely attach crankshaft pulley/harmonic balancer to crankshaft.

Transmission

Bolt torque specifications for transmission components, including transmission mounting bolts, transmission oil pan bolts, and transmission drain and fill plugs.

1

Transmission Mounting Bolts

M12 x 1.5
Torque Value
44 ft-lbs (60 N·m)
Important Notes
Securely attach transmission to engine and chassis.
2

Transmission Oil Pan Bolts

M8 x 1.25
Torque Value
6 ft-lbs (8 N·m)
Important Notes
Securely attach transmission oil pan to transmission.
3

Transmission Drain and Fill Plugs

M10 x 1.25
Torque Value
33 ft-lbs (45 N·m)
Important Notes
Securely attach transmission drain and fill plugs to transmission.

Drivetrain

Bolt torque specifications for drivetrain components, including drive axle/half shaft bolts, CV joint/axle nut, propeller/drive shaft bolts, differential cover bolts, transfer case mounting bolts, and axle shaft retaining bolts.

1

Drive Axle/Half Shaft Bolts

M14 x 1.5
Torque Value
59 ft-lbs (80 N·m)
Important Notes
Securely attach drive axle/half shaft to transmission and differential.
2

CV Joint/Axle Nut

M16 x 1.5
Torque Value
177 ft-lbs (240 N·m)
Important Notes
Securely attach CV joint to axle.
3

Propeller/Drive Shaft Bolts

M12 x 1.5
Torque Value
22 ft-lbs (30 N·m)
Important Notes
Securely attach propeller/drive shaft to transmission and differential.
4

Differential Cover Bolts

M10 x 1.25
Torque Value
30 ft-lbs (40 N·m)
Important Notes
Securely attach differential cover to differential.
5

Transfer Case Mounting Bolts

M12 x 1.5
Torque Value
40 ft-lbs (55 N·m)
Important Notes
Securely attach transfer case to transmission and chassis.
6

Axle Shaft Retaining Bolts

M14 x 1.5
Torque Value
50 ft-lbs (68 N·m)
Important Notes
Securely attach axle shafts to differential and transmission.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What is the recommended torque specification for the drivetrain bolts on a 2010-2018 Volvo V60?

The recommended torque specification for the drivetrain bolts on a 2010-2018 Volvo V60 varies depending on the specific bolt and location. However, here are some general torque specifications: transmission mounts (40-50 Nm), driveshaft bolts (60-70 Nm), and differential cover bolts (30-40 Nm). It's essential to consult the repair manual or manufacturer's instructions for specific torque values.

Q2

Why is it important to follow the recommended torque specifications for drivetrain bolts?

Following the recommended torque specifications for drivetrain bolts is crucial to ensure the longevity and reliability of the drivetrain system. Over-torquing can damage the bolts, while under-torquing can lead to loose connections and premature wear. Proper torque values help maintain the correct clamping force, reducing the risk of component failure and costly repairs.

Q3

How often should I check and maintain the drivetrain bolts on my 2010-2018 Volvo V60?

It's recommended to check the drivetrain bolts every 12,000 to 15,000 miles or during routine maintenance. Inspect the bolts for signs of wear, corrosion, or damage. If you notice any issues, replace the bolts as needed. Additionally, consider re-torquing the bolts after any repairs or replacements to ensure proper clamping force.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Torque Wrench

A precision tool for applying accurate torque values

  • Digital display
  • Adjustable torque range
Learn more

Socket Set

A set of sockets for various bolt sizes

  • Metric and SAE sizes
  • Chrome vanadium steel construction
Learn more

Drivetrain Bolt Socket

A specialized socket for drivetrain bolts

  • Specifically designed for Volvo drivetrain bolts
  • High-torque capacity
Learn more
Service Procedures

Drivetrain Bolt Torque Specification

A step-by-step guide to applying the correct torque values to drivetrain bolts

  • Locate the drivetrain bolts and ensure they are clean and free of debris
  • Apply the recommended torque value using a torque wrench
  • Double-check the torque value to ensure accuracy
View full procedure

Drivetrain Bolt Replacement

A step-by-step guide to replacing drivetrain bolts

  • Remove the old drivetrain bolt using a socket wrench
  • Inspect the bolt hole for damage or debris
  • Install the new drivetrain bolt and apply the recommended torque value
View full procedure
Technical Service Bulletins

Drivetrain Bolt Torque Specification Update

2015-02-15

An update to the recommended torque values for drivetrain bolts

2010-2015 Volvo V60

Resolution: Apply the updated torque values to ensure proper drivetrain function

Drivetrain Bolt Failure Due to Over-Torquing

2012-08-20

A bulletin regarding drivetrain bolt failure due to over-torquing

2010-2012 Volvo V60

Resolution: Inspect the drivetrain bolts for damage and replace if necessary

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

© 2025 Volvo Specs. All rights reserved.

Privacy Policy Terms of Service