Volvo Volvo XC60 2017-present Exhaust System Bolt Torque Specifications & Gasket Sealing
Volvo Volvo XC60 2017-present

Volvo Volvo XC60 2017-present Exhaust System Bolt Torque Specifications

Detailed torque specifications for the exhaust bolts of the 2017-Present Volvo XC60, including tightening sequences and recommended torque values.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

Exhaust Manifold Headers

This subsystem includes components that connect the exhaust manifold or headers to the cylinder head and exhaust pipe. Proper torque ensures a tight seal to prevent exhaust leaks, which can affect engine performance and emissions.

1

Exhaust Manifold/Headers to Cylinder Head Bolts

M10 x 1.25
Torque Value
25 ft-lbs (34 N·m)
Important Notes
Ensure proper sequence is followed to avoid warping the manifold or headers.
2

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M10 x 1.25
Torque Value
25 ft-lbs (34 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Catalytic Converter

This subsystem includes components that connect the catalytic converter to the exhaust pipe. Proper torque ensures a leak-free connection, which is essential for maintaining proper exhaust flow and emissions control.

1

Catalytic Converter to Exhaust Pipe Bolts

M10 x 1.25
Torque Value
25 ft-lbs (34 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Muffler

This subsystem includes components that connect the muffler to the exhaust pipe. Correct torque ensures a secure fit and prevents leaks, which can affect exhaust noise and performance.

1

Muffler to Exhaust Pipe Bolts

M10 x 1.25
Torque Value
25 ft-lbs (34 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Oxygen Sensor

This subsystem includes components that secure the oxygen sensor to the exhaust system. Proper torque ensures a secure fit and prevents leaks, which could lead to inaccurate sensor readings and poor engine performance.

1

Oxygen Sensor (O2 Sensor) Mounting Bolts

M8 x 1.25
Torque Value
30 ft-lbs (41 N·m)
Important Notes
Ensure sensor is properly aligned before tightening.

Exhaust Hanger

This subsystem includes components that support the weight of the exhaust system and prevent excessive movement. Proper torque ensures the hangers remain securely attached, reducing stress on the exhaust components and preventing damage.

1

Exhaust Hanger Bolts

M6 x 1.0
Torque Value
18 ft-lbs (24 N·m)
Important Notes
Ensure hanger is properly aligned before tightening.

Heat Shield

This subsystem includes components that protect surrounding components from excessive heat generated by the exhaust system. Proper torque ensures the shields remain securely in place, preventing rattling and potential damage to nearby parts.

1

Exhaust Heat Shield Bolts

M6 x 1.0
Torque Value
10 ft-lbs (14 N·m)
Important Notes
Ensure heat shield is properly aligned before tightening.

Flex Pipe Joint

This subsystem includes components that allow for movement between exhaust components due to engine vibrations. Proper torque ensures a secure connection while allowing for necessary flexibility, preventing leaks and damage.

1

Flex Pipe/Exhaust Joint Bolts

M10 x 1.25
Torque Value
25 ft-lbs (34 N·m)
Important Notes
Ensure gasket is properly seated before tightening.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What is the torque specification for the exhaust manifold bolts on a 2017-Present Volvo XC60?

The torque specification for the exhaust manifold bolts on a 2017-Present Volvo XC60 is typically 25 Nm (18 lb-ft). However, always refer to the vehicle's service manual for the exact specifications, as variations may exist depending on the engine type.

Q2

How often should I check the torque on my exhaust bolts?

It is recommended to check the torque on exhaust bolts during routine maintenance, such as every 30,000 miles or if you notice symptoms like exhaust leaks, unusual noises, or vibrations. Regular inspections ensure the bolts remain secure and prevent potential damage to the exhaust system.

Q3

Can I reuse exhaust bolts after removal?

Exhaust bolts are often exposed to high temperatures and stress, which can cause them to weaken over time. It is generally recommended to replace them with new bolts to ensure proper torque and prevent failure. Reusing old bolts may lead to leaks or breakage.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Torque Wrench

A precision tool for applying specific torque values to bolts.

  • Adjustable torque settings
  • Calibrated for accuracy
Learn more

Socket Set

A set of sockets for various bolt sizes, including exhaust bolts.

  • Includes metric sizes
  • Durable construction
Learn more

Thread Locker

A chemical compound to secure bolts and prevent loosening.

  • High-temperature resistance
  • Prevents vibration-induced loosening
Learn more
Service Procedures

Exhaust Manifold Bolt Torque Procedure

Step-by-step guide for torquing exhaust manifold bolts on a 2017-Present Volvo XC60.

  • Ensure the engine is cool before starting.
  • Remove the necessary components to access the exhaust manifold bolts.
  • Clean the bolt threads and apply thread locker if recommended.
  • Tighten the bolts in a crisscross pattern to the specified torque value (refer to the vehicle's service manual).
  • Reinstall all removed components and verify proper installation.
View full procedure

Exhaust Pipe Flange Bolt Torque Procedure

Procedure for torquing exhaust pipe flange bolts on a 2017-Present Volvo XC60.

  • Inspect the flange and bolts for damage or wear.
  • Align the exhaust pipe and flange correctly.
  • Hand-tighten the bolts to ensure proper alignment.
  • Use a torque wrench to tighten the bolts to the specified torque value.
  • Check for exhaust leaks after installation.
View full procedure
Technical Service Bulletins

Exhaust Bolt Loosening Issue

2021-05-15

Some 2017-Present Volvo XC60 models may experience loosening of exhaust manifold bolts due to vibration.

2017-2023 Volvo XC60

Resolution: Apply thread locker to the exhaust manifold bolts and retorque to the specified value.

Exhaust Flange Bolt Corrosion

2022-08-10

Reports of corrosion on exhaust flange bolts in certain climates.

2017-2023 Volvo XC60

Resolution: Replace corroded bolts with stainless steel bolts and apply anti-seize compound during installation.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

© 2025 Volvo Specs. All rights reserved.

Privacy Policy Terms of Service