Volvo Volvo XC60 2017-present TG-81 Transmission Transmission Torque Specifications & Bolt Torque Values
Volvo Volvo XC60 2017-present

Volvo Volvo XC60 2017-present TG-81 Transmission Torque Specifications

Detailed torque specifications for the TG-81 transmission bolts on the 2017-Present Volvo XC60. Includes step-by-step instructions and technical details for proper installation and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

Transmission Mounting

Bolts and components that secure the transmission to the vehicle's chassis, ensuring proper alignment and stability.

1

Transmission Mounting Bolts

M10 x 1.5
Torque Value
45 ft-lbs (61 N·m)
Important Notes
Ensure proper alignment of the transmission before tightening.
2

Transmission Crossmember Bolts

M12 x 1.75
Torque Value
50 ft-lbs (68 N·m)
Important Notes
Ensure the crossmember is properly aligned before tightening.

Transmission Fluid System

Components related to the transmission fluid, including the oil pan, drain, and fill plugs.

1

Transmission Oil Pan Bolts

M6 x 1.0
Torque Value
8 ft-lbs (11 N·m)
Important Notes
Over-tightening can damage the oil pan or gasket.
2

Transmission Drain and Fill Plugs

M14 x 1.5
Torque Value
25 ft-lbs (34 N·m)
Important Notes
Ensure the plugs are properly sealed to prevent leaks.

Drivetrain Connections

Bolts and nuts that connect the transmission to the drivetrain components, including drive axles, CV joints, and propeller shafts.

1

Drive Axle/Half Shaft Bolts

M12 x 1.75
Torque Value
50 ft-lbs (68 N·m)
Important Notes
Ensure proper alignment of the drive axles before tightening.
2

CV Joint/Axle Nut

M24 x 1.5
Torque Value
180 ft-lbs (244 N·m)
Important Notes
Use a torque wrench with a high-capacity adapter for this nut.
3

Propeller/Drive Shaft Bolts

M10 x 1.5
Torque Value
45 ft-lbs (61 N·m)
Important Notes
Ensure proper alignment of the drive shaft before tightening.

Torque Converter And Bellhousing

Bolts that secure the torque converter to the flexplate and the transmission bellhousing to the engine block.

1

Torque Converter Bolts

M8 x 1.25
Torque Value
35 ft-lbs (47 N·m)
Important Notes
Ensure the torque converter is properly seated before tightening.
2

Transmission Bellhousing Bolts

M10 x 1.5
Torque Value
40 ft-lbs (54 N·m)
Important Notes
Ensure proper alignment of the bellhousing before tightening.

Shift Linkage And Cooler Lines

Bolts and fittings related to the shift linkage and transmission cooler lines.

1

Shift Linkage Bolts

M6 x 1.0
Torque Value
18 ft-lbs (24 N·m)
Important Notes
Ensure the shift linkage is properly aligned before tightening.
2

Transmission Cooler Line Fittings

M12 x 1.5
Torque Value
20 ft-lbs (27 N·m)
Important Notes
Ensure the cooler lines are properly seated before tightening.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What is the recommended torque specification for the TG-81 transmission bolts on a 2017-Present Volvo XC60?

The recommended torque specification for the TG-81 transmission bolts is typically between 25-30 Nm (Newton-meters) for most bolts, but specific bolts may vary. Always refer to the official Volvo service manual for precise values, as over-tightening or under-tightening can lead to transmission issues.

Q2

How often should I check the torque on the TG-81 transmission bolts?

It is recommended to check the torque on the TG-81 transmission bolts during routine maintenance intervals, such as every 30,000 miles or if you notice symptoms like transmission fluid leaks, unusual noises, or shifting issues. Regular inspections ensure the bolts remain secure and prevent potential damage.

Q3

Can I reuse the TG-81 transmission bolts after removal?

Reusing TG-81 transmission bolts is generally not recommended, as they are designed to stretch during installation to ensure proper clamping force. Reusing old bolts can compromise the integrity of the transmission assembly. Always replace them with new, manufacturer-approved bolts.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench

A precision tool for applying the correct torque to transmission bolts.

  • Adjustable torque settings
  • Digital display for accurate readings
Learn more

Torque Angle Gauge

Used to measure the angle of rotation when applying torque to bolts.

  • Angle measurement up to 360 degrees
  • Magnetic base for easy attachment
Learn more

Thread Locking Compound

Ensures bolts remain secure after torque application.

  • High-strength formula
  • Resistant to vibration and heat
Learn more
Service Procedures

TG-81 Transmission Bolt Torque Application

Detailed steps for applying the correct torque to TG-81 transmission bolts.

  • Ensure the transmission is properly aligned and secured.
  • Clean the bolt threads and apply a small amount of thread locking compound.
  • Using a digital torque wrench, tighten the bolts to the specified torque value in a crisscross pattern.
  • Use a torque angle gauge to apply the final angle torque as specified in the service manual.
  • Double-check all bolts to ensure they are properly torqued.
View full procedure
Technical Service Bulletins

TG-81 Transmission Bolt Torque Specification Update

2021-05-15

Updated torque specifications for TG-81 transmission bolts to prevent over-tightening and potential damage.

2017-2023 Volvo XC60

Resolution: Follow the updated torque specifications provided in the service manual and use a digital torque wrench for accurate application.

TG-81 Transmission Bolt Loosening Issue

2020-08-10

Reports of transmission bolts loosening over time due to improper torque application.

2017-2020 Volvo XC60

Resolution: Ensure proper torque application using a torque angle gauge and apply thread locking compound to prevent loosening.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

© 2025 Volvo Specs. All rights reserved.

Privacy Policy Terms of Service