Volvo Vehicle Models Volvo V60 2010-2018
Volvo Vehicle Models Volvo V60 2010-2018 Torque Specifications
Complete Volvo Vehicle Models Volvo V60 2010-2018 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.
Updated
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Prevention:
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Prevention:
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Prevention:
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Prevention:
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Prevention:
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Range: 2-25 ft-lbs
Small fasteners, delicate components
Torque Wrench (3/8" Drive)
Range: 10-100 ft-lbs
Most common automotive fasteners
Torque Wrench (1/2" Drive)
Range: 30-250 ft-lbs
Large fasteners, wheels
Angle Gauge
Torque-to-yield (TTY) bolts
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Type to search through torque specifications. Use arrow keys to navigate results. Press Enter to select a result.
Torque Calculator
Convert between different torque units
1.6l I4 Engine
Torque specifications for 1.6L-I4 Engine
1.6l I4 Engine
Torque specifications for 1.6L-I4 Engine
Cylinder Head and Valve Train
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2 Valve Cover Bolts
M8 x 1.25
2
Valve Cover Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
3 Rocker Arms/Shafts Bolts
M10 x 1.5
3
Rocker Arms/Shafts Bolts
M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Engine Block and Main Bearings
1 Main Bearing Bolts
M14 x 2.0
1
Main Bearing Bolts
M14 x 2.0
Torque Specification
45 ft-lbs (61 N·m)
2 Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 2.0
2
Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 2.0
Torque Specification
118 ft-lbs (160 N·m)
Timing System
1 Timing Belt/Chain Tensioner Bolt
M12 x 1.5
1
Timing Belt/Chain Tensioner Bolt
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2 Camshaft Sprocket Bolt
M14 x 2.0
2
Camshaft Sprocket Bolt
M14 x 2.0
Torque Specification
52 ft-lbs (70 N·m)
Intake and Exhaust Systems
1 Intake Manifold Bolts
M10 x 1.5
1
Intake Manifold Bolts
M10 x 1.5
Torque Specification
7 ft-lbs (10 N·m)
2 Exhaust Manifold/Header Bolts
M12 x 1.5
2
Exhaust Manifold/Header Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
3 Throttle Body Bolts
M8 x 1.25
3
Throttle Body Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Fuel System
1 Fuel Rail Bolts
M8 x 1.25
1
Fuel Rail Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
2 Fuel Injector Bolts
M8 x 1.25
2
Fuel Injector Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
3 Fuel Filter Cap
3
Fuel Filter Cap
Torque Specification
N/A
Important Notes
Hand-tighten only
Cooling System
1 Water Pump Bolts
M10 x 1.5
1
Water Pump Bolts
M10 x 1.5
Torque Specification
11 ft-lbs (15 N·m)
2 Water Pump Pulley Bolts
M12 x 1.5
2
Water Pump Pulley Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
3 Thermostat Housing Bolts
M8 x 1.25
3
Thermostat Housing Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Turbocharger System
1 Turbocharger Mounting Bolts
M14 x 2.0
1
Turbocharger Mounting Bolts
M14 x 2.0
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Estimated value
2 Turbocharger Oil Feed Line Bolts
M10 x 1.5
2
Turbocharger Oil Feed Line Bolts
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value
3 Intercooler Mounting Bolts
M12 x 1.5
3
Intercooler Mounting Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value
1.6l I4 Turbo Engine
Torque specifications for 1.6L-I4-TURBO Engine
1.6l I4 Turbo Engine
Torque specifications for 1.6L-I4-TURBO Engine
Cylinder Head and Valve Train
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2 Valve Cover Bolts
M8 x 1.25
2
Valve Cover Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
3 Rocker Arms/Shafts Bolts
M10 x 1.5
3
Rocker Arms/Shafts Bolts
M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Engine Block and Main Bearings
1 Main Bearing Bolts
M14 x 2.0
1
Main Bearing Bolts
M14 x 2.0
Torque Specification
45 ft-lbs (61 N·m)
2 Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 2.0
2
Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 2.0
Torque Specification
118 ft-lbs (160 N·m)
Timing System
1 Timing Belt/Chain Tensioner Bolt
M12 x 1.5
1
Timing Belt/Chain Tensioner Bolt
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2 Camshaft Sprocket Bolt
M14 x 2.0
2
Camshaft Sprocket Bolt
M14 x 2.0
Torque Specification
52 ft-lbs (70 N·m)
Intake and Exhaust Systems
1 Intake Manifold Bolts
M10 x 1.5
1
Intake Manifold Bolts
M10 x 1.5
Torque Specification
7 ft-lbs (10 N·m)
2 Exhaust Manifold/Header Bolts
M12 x 1.5
2
Exhaust Manifold/Header Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
3 Throttle Body Bolts
M8 x 1.25
3
Throttle Body Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Fuel System
1 Fuel Rail Bolts
M8 x 1.25
1
Fuel Rail Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
2 Fuel Injector Bolts
M8 x 1.25
2
Fuel Injector Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
3 Fuel Filter Cap
3
Fuel Filter Cap
Torque Specification
N/A
Important Notes
Hand-tighten only
Cooling System
1 Water Pump Bolts
M10 x 1.5
1
Water Pump Bolts
M10 x 1.5
Torque Specification
11 ft-lbs (15 N·m)
2 Water Pump Pulley Bolts
M12 x 1.5
2
Water Pump Pulley Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
3 Thermostat Housing Bolts
M8 x 1.25
3
Thermostat Housing Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Turbocharger System
1 Turbocharger Mounting Bolts
M14 x 2.0
1
Turbocharger Mounting Bolts
M14 x 2.0
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Estimated value
2 Turbocharger Oil Feed Line Bolts
M10 x 1.5
2
Turbocharger Oil Feed Line Bolts
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value
3 Intercooler Mounting Bolts
M12 x 1.5
3
Intercooler Mounting Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value
2.0l I4 Engine
Torque specifications for 2.0L-I4 Engine
2.0l I4 Engine
Torque specifications for 2.0L-I4 Engine
Cylinder Head
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Engine Block
1 Main Bearing Bolts
M14 x 1.5
1
Main Bearing Bolts
M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
2 Oil Pan Bolts
M10 x 1.5
2
Oil Pan Bolts
M10 x 1.5
Torque Specification
6 ft-lbs (8 N·m)
Valvetrain
1 Valve Cover Bolts
M8 x 1.25
1
Valve Cover Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
2 Rocker Arms/Shafts Bolts
M10 x 1.5
2
Rocker Arms/Shafts Bolts
M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Timing System
1 Timing Belt/Chain Tensioner Bolt
M12 x 1.5
1
Timing Belt/Chain Tensioner Bolt
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2 Camshaft Sprocket Bolt
M14 x 1.5
2
Camshaft Sprocket Bolt
M14 x 1.5
Torque Specification
52 ft-lbs (70 N·m)
Crankshaft
1 Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 1.5
1
Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 1.5
Torque Specification
118 ft-lbs (160 N·m)
Intake System
1 Throttle Body Bolts
M8 x 1.25
1
Throttle Body Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
2 Intake Manifold Bolts
M10 x 1.5
2
Intake Manifold Bolts
M10 x 1.5
Torque Specification
7 ft-lbs (10 N·m)
Exhaust System
1 Exhaust Manifold/Headers Bolts
M12 x 1.5
1
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Fuel System
1 Fuel Rail Bolts
M8 x 1.25
1
Fuel Rail Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
2 Fuel Injector Bolts
M8 x 1.25
2
Fuel Injector Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Ignition System
1 Ignition Coil Bolt
M8 x 1.25
1
Ignition Coil Bolt
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Cooling System
1 Water Pump Bolts
M10 x 1.5
1
Water Pump Bolts
M10 x 1.5
Torque Specification
11 ft-lbs (15 N·m)
2 Water Pump Pulley Bolts
M12 x 1.5
2
Water Pump Pulley Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Turbocharger
1 Turbocharger Mounting Bolts
M14 x 1.5
1
Turbocharger Mounting Bolts
M14 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Estimated value based on industry standards.
Intercooler
1 Intercooler Mounting Bolts
M12 x 1.5
1
Intercooler Mounting Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on industry standards.
Engine Mounts
1 Engine Block to Transmission Mounting Bolts
M16 x 1.5
1
Engine Block to Transmission Mounting Bolts
M16 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on industry standards.
Oil Cooler
1 Oil Cooler Lines Fittings
M10 x 1.5
1
Oil Cooler Lines Fittings
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on industry standards.
2.0l I4 Turbo Engine
Torque specifications for 2.0L-I4-TURBO Engine
2.0l I4 Turbo Engine
Torque specifications for 2.0L-I4-TURBO Engine
Cylinder Head
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Engine Block
1 Main Bearing Bolts
M14 x 1.5
1
Main Bearing Bolts
M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
2 Oil Pan Bolts
M10 x 1.5
2
Oil Pan Bolts
M10 x 1.5
Torque Specification
6 ft-lbs (8 N·m)
Valvetrain
1 Valve Cover Bolts
M8 x 1.25
1
Valve Cover Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
2 Rocker Arms/Shafts Bolts
M10 x 1.5
2
Rocker Arms/Shafts Bolts
M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Timing System
1 Timing Belt/Chain Tensioner Bolt
M12 x 1.5
1
Timing Belt/Chain Tensioner Bolt
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2 Camshaft Sprocket Bolt
M14 x 1.5
2
Camshaft Sprocket Bolt
M14 x 1.5
Torque Specification
52 ft-lbs (70 N·m)
Crankshaft
1 Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 1.5
1
Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 1.5
Torque Specification
118 ft-lbs (160 N·m)
Intake System
1 Throttle Body Bolts
M8 x 1.25
1
Throttle Body Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
2 Intake Manifold Bolts
M10 x 1.5
2
Intake Manifold Bolts
M10 x 1.5
Torque Specification
7 ft-lbs (10 N·m)
Exhaust System
1 Exhaust Manifold/Headers Bolts
M12 x 1.5
1
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Fuel System
1 Fuel Rail Bolts
M8 x 1.25
1
Fuel Rail Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
2 Fuel Injector Bolts
M8 x 1.25
2
Fuel Injector Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Ignition System
1 Ignition Coil Bolt
M8 x 1.25
1
Ignition Coil Bolt
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Cooling System
1 Water Pump Bolts
M10 x 1.5
1
Water Pump Bolts
M10 x 1.5
Torque Specification
11 ft-lbs (15 N·m)
2 Water Pump Pulley Bolts
M12 x 1.5
2
Water Pump Pulley Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Turbocharger
1 Turbocharger Mounting Bolts
M14 x 1.5
1
Turbocharger Mounting Bolts
M14 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Estimated value based on industry standards.
Intercooler
1 Intercooler Mounting Bolts
M12 x 1.5
1
Intercooler Mounting Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on industry standards.
Engine Mounts
1 Engine Block to Transmission Mounting Bolts
M16 x 1.5
1
Engine Block to Transmission Mounting Bolts
M16 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on industry standards.
Oil Cooler
1 Oil Cooler Lines Fittings
M10 x 1.5
1
Oil Cooler Lines Fittings
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on industry standards.
2.4l I5 Diesel Engine
Torque specifications for 2.4L-I5-DIESEL Engine
2.4l I5 Diesel Engine
Torque specifications for 2.4L-I5-DIESEL Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2 Main Bearing Bolts
M14 x 1.5
2
Main Bearing Bolts
M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
3 Oil Pan Bolts
M10 x 1.5
3
Oil Pan Bolts
M10 x 1.5
Torque Specification
6 ft-lbs (8 N·m)
Valvetrain
1 Valve Cover Bolts
M8 x 1.25
1
Valve Cover Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
2 Timing Belt/Chain Tensioner Bolt
M12 x 1.5
2
Timing Belt/Chain Tensioner Bolt
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Crankshaft and Connecting Rods
1 Connecting Rod Nuts
M14 x 1.5
1
Connecting Rod Nuts
M14 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Flywheel Bolts
M16 x 1.5
2
Flywheel Bolts
M16 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Fuel System
1 Fuel Rail Bolts
M8 x 1.25
1
Fuel Rail Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
2 Fuel Injector Bolts
M8 x 1.25
2
Fuel Injector Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Cooling System
1 Water Pump Bolts
M10 x 1.5
1
Water Pump Bolts
M10 x 1.5
Torque Specification
11 ft-lbs (15 N·m)
2 Thermostat Housing Bolts
M8 x 1.25
2
Thermostat Housing Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Exhaust System
1 Exhaust Manifold/Headers Bolts
M12 x 1.5
1
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2 Turbocharger Mounting Bolts
M14 x 1.5
2
Turbocharger Mounting Bolts
M14 x 1.5
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on industry standards.
Diesel Fuel System
1 Diesel Fuel Injector Pump Mounting Bolts
M14 x 1.5
1
Diesel Fuel Injector Pump Mounting Bolts
M14 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Estimated value based on industry standards.
2 Diesel Fuel Injector Pump Pulley Bolt
M12 x 1.5
2
Diesel Fuel Injector Pump Pulley Bolt
M12 x 1.5
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value based on industry standards.
2.5l I5 Engine
Torque specifications for 2.5L-I5 Engine
2.5l I5 Engine
Torque specifications for 2.5L-I5 Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2 Main Bearing Bolts
M14 x 1.5
2
Main Bearing Bolts
M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Crankshaft and Connecting Rods
1 Connecting Rod Nuts
M10 x 1.5
1
Connecting Rod Nuts
M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Flywheel Bolts
M12 x 1.5
2
Flywheel Bolts
M12 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Valvetrain and Timing System
1 Valve Cover Bolts
M8 x 1.25
1
Valve Cover Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
2 Timing Belt/Chain Tensioner Bolt
M12 x 1.5
2
Timing Belt/Chain Tensioner Bolt
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Intake and Exhaust System
1 Throttle Body Bolts
M8 x 1.25
1
Throttle Body Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
2 Intake Manifold Bolts
M10 x 1.5
2
Intake Manifold Bolts
M10 x 1.5
Torque Specification
7 ft-lbs (10 N·m)
Turbocharger and Intercooler
1 Turbocharger Mounting Bolts
M14 x 1.5
1
Turbocharger Mounting Bolts
M14 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Estimated value based on industry standards.
2 Intercooler Mounting Bolts
M12 x 1.5
2
Intercooler Mounting Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on industry standards.
2.5l I5 Turbo Engine
Torque specifications for 2.5L-I5-TURBO Engine
2.5l I5 Turbo Engine
Torque specifications for 2.5L-I5-TURBO Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2 Main Bearing Bolts
M14 x 1.5
2
Main Bearing Bolts
M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Crankshaft and Connecting Rods
1 Connecting Rod Nuts
M10 x 1.5
1
Connecting Rod Nuts
M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Flywheel Bolts
M12 x 1.5
2
Flywheel Bolts
M12 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Valvetrain and Timing System
1 Valve Cover Bolts
M8 x 1.25
1
Valve Cover Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
2 Timing Belt/Chain Tensioner Bolt
M12 x 1.5
2
Timing Belt/Chain Tensioner Bolt
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Intake and Exhaust System
1 Throttle Body Bolts
M8 x 1.25
1
Throttle Body Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
2 Intake Manifold Bolts
M10 x 1.5
2
Intake Manifold Bolts
M10 x 1.5
Torque Specification
7 ft-lbs (10 N·m)
Turbocharger and Intercooler
1 Turbocharger Mounting Bolts
M14 x 1.5
1
Turbocharger Mounting Bolts
M14 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Estimated value based on industry standards.
2 Intercooler Mounting Bolts
M12 x 1.5
2
Intercooler Mounting Bolts
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on industry standards.
Body
Torque specifications for Body
Body
Torque specifications for Body
Suspension
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
52 ft-lbs (70 N·m)
Important Notes
Secure the strut/shock absorber to the vehicle's body.
2 Control Arm Bolts
M16 x 1.5
2
Control Arm Bolts
M16 x 1.5
Torque Specification
66 ft-lbs (90 N·m)
Important Notes
Attach the control arms to the vehicle's body.
3 Ball Joint Nut
M12 x 1.25
3
Ball Joint Nut
M12 x 1.25
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Secure the ball joint to the control arm.
4 Tie Rod End Nut
M10 x 1.25
4
Tie Rod End Nut
M10 x 1.25
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Attach the tie rod end to the steering gear.
5 Sway Bar Link Nut
M10 x 1.25
5
Sway Bar Link Nut
M10 x 1.25
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Secure the sway bar link to the sway bar.
Steering
1 Steering Gear/Rack Bolts
M14 x 1.5
1
Steering Gear/Rack Bolts
M14 x 1.5
Torque Specification
74 ft-lbs (100 N·m)
Important Notes
Attach the steering gear/rack to the vehicle's body.
Body
1 Body Mount Bolts
M12 x 1.25
1
Body Mount Bolts
M12 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value. Secure the vehicle's body to the frame.
Doors and Hood
1 Door Hinge Bolts
M8 x 1.25
1
Door Hinge Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Attach the door hinges to the vehicle's body.
2 Trunk Lid Hinge Bolts
M8 x 1.25
2
Trunk Lid Hinge Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Attach the trunk lid hinges to the vehicle's body.
3 Hood Hinge Bolts
M8 x 1.25
3
Hood Hinge Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Attach the hood hinges to the vehicle's body.
Brakes
Torque specifications for Brakes
Brakes
Torque specifications for Brakes
Brake Caliper Assembly
1 Brake Caliper Bolts
M12 x 1.5
1
Brake Caliper Bolts
M12 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Secure the brake caliper to the rotor or drum.
2 Brake Caliper Mounting Bracket Bolts
M14 x 1.5
2
Brake Caliper Mounting Bracket Bolts
M14 x 1.5
Torque Specification
95 ft-lbs (129 N·m)
Important Notes
Secure the brake caliper mounting bracket to the steering knuckle or suspension component.
Brake Rotor/Drum Assembly
1 Brake Disc/Drum Retaining Bolts
M10 x 1.25
1
Brake Disc/Drum Retaining Bolts
M10 x 1.25
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Secure the brake disc or drum to the hub or wheel bearing.
Brake Master Cylinder and Booster Assembly
1 Brake Master Cylinder Mounting Bolts
M8 x 1.25
1
Brake Master Cylinder Mounting Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Estimated value. Secure the brake master cylinder to the brake booster or firewall.
2 Brake Booster Mounting Bolts
M10 x 1.5
2
Brake Booster Mounting Bolts
M10 x 1.5
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Estimated value. Secure the brake booster to the firewall or brake master cylinder.
ABS Module and Brake Lines
1 ABS Module Mounting Bolts
M8 x 1.25
1
ABS Module Mounting Bolts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value. Secure the ABS module to the brake system or vehicle frame.
2 Brake Line Fittings
M6 x 1.0
2
Brake Line Fittings
M6 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value. Secure the brake lines to the brake calipers, master cylinder, or ABS module.
Drivetrain
Torque specifications for Drivetrain
Drivetrain
Torque specifications for Drivetrain
Engine
1 Flywheel Bolts
M12 x 1.5
1
Flywheel Bolts
M12 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Securely attach flywheel to crankshaft.
2 Main Bearing Bolts
M10 x 1.25
2
Main Bearing Bolts
M10 x 1.25
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Securely attach main bearings to engine block.
3 Connecting Rod Nuts
M8 x 1.25
3
Connecting Rod Nuts
M8 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Securely attach connecting rods to crankshaft.
4 Crankshaft Pulley/Harmonic Balancer Bolt
M14 x 1.5
4
Crankshaft Pulley/Harmonic Balancer Bolt
M14 x 1.5
Torque Specification
118 ft-lbs (160 N·m)
Important Notes
Securely attach crankshaft pulley/harmonic balancer to crankshaft.
Transmission
1 Transmission Mounting Bolts
M12 x 1.5
1
Transmission Mounting Bolts
M12 x 1.5
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Securely attach transmission to engine and chassis.
2 Transmission Oil Pan Bolts
M8 x 1.25
2
Transmission Oil Pan Bolts
M8 x 1.25
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Securely attach transmission oil pan to transmission.
3 Transmission Drain and Fill Plugs
M10 x 1.25
3
Transmission Drain and Fill Plugs
M10 x 1.25
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Securely attach transmission drain and fill plugs to transmission.
Drivetrain
1 Drive Axle/Half Shaft Bolts
M14 x 1.5
1
Drive Axle/Half Shaft Bolts
M14 x 1.5
Torque Specification
59 ft-lbs (80 N·m)
Important Notes
Securely attach drive axle/half shaft to transmission and differential.
2 CV Joint/Axle Nut
M16 x 1.5
2
CV Joint/Axle Nut
M16 x 1.5
Torque Specification
177 ft-lbs (240 N·m)
Important Notes
Securely attach CV joint to axle.
3 Propeller/Drive Shaft Bolts
M12 x 1.5
3
Propeller/Drive Shaft Bolts
M12 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Securely attach propeller/drive shaft to transmission and differential.
4 Differential Cover Bolts
M10 x 1.25
4
Differential Cover Bolts
M10 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Securely attach differential cover to differential.
5 Transfer Case Mounting Bolts
M12 x 1.5
5
Transfer Case Mounting Bolts
M12 x 1.5
Torque Specification
40 ft-lbs (55 N·m)
Important Notes
Securely attach transfer case to transmission and chassis.
6 Axle Shaft Retaining Bolts
M14 x 1.5
6
Axle Shaft Retaining Bolts
M14 x 1.5
Torque Specification
50 ft-lbs (68 N·m)
Important Notes
Securely attach axle shafts to differential and transmission.
Electrical
Torque specifications for Electrical
Electrical
Torque specifications for Electrical
Alternator and Starter Motor
1 Alternator Mounting Bolts
M12 x 1.5
1
Alternator Mounting Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
2 Starter Motor Mounting Bolts
M14 x 1.5
2
Starter Motor Mounting Bolts
M14 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
Battery and Electrical Connectors
1 Battery Terminal Nuts
M8 x 1.25
1
Battery Terminal Nuts
M8 x 1.25
Torque Specification
6 ft-lbs (8 N·m)
2 Ignition Coil Mounting Bolts
M10 x 1.5
2
Ignition Coil Mounting Bolts
M10 x 1.5
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Estimated value, may vary depending on manufacturer's recommendations.
3 Fuel Pump Electrical Connector Bolts
M6 x 1.0
3
Fuel Pump Electrical Connector Bolts
M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Estimated value, may vary depending on manufacturer's recommendations.
4 A/C Compressor Electrical Connector Bolts
M6 x 1.0
4
A/C Compressor Electrical Connector Bolts
M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Estimated value, may vary depending on manufacturer's recommendations.
5 Power Steering Pump Electrical Connector Bolts
M6 x 1.0
5
Power Steering Pump Electrical Connector Bolts
M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Estimated value, may vary depending on manufacturer's recommendations.
Emissions Sensors
Torque specifications for Emissions_sensors
Emissions Sensors
Torque specifications for Emissions_sensors
EGR System
1 EGR Valve Bolts
M10 x 1.5
1
EGR Valve Bolts
M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Proper torque ensures a leak-free connection and optimal performance.
Oxygen Sensor System
1 Oxygen Sensor Bolts
M8 x 1.25
1
Oxygen Sensor Bolts
M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value based on industry standards. Consult vehicle manufacturer's recommendations for specific torque specifications.
NOx Sensor System
1 NOx Sensor Bolts
M8 x 1.25
1
NOx Sensor Bolts
M8 x 1.25
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value based on industry standards. Consult vehicle manufacturer's recommendations for specific torque specifications.
Catalytic Converter System
1 Catalytic Converter to Exhaust Pipe Bolts
M12 x 1.5
1
Catalytic Converter to Exhaust Pipe Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Proper torque ensures a leak-free connection and optimal performance.
Diesel Particulate Filter System
1 DPF Bolts
M14 x 1.5
1
DPF Bolts
M14 x 1.5
Torque Specification
35 ft-lbs (47.5 N·m)
Important Notes
Estimated value based on industry standards. Consult vehicle manufacturer's recommendations for specific torque specifications.
Exhaust Manifold System
1 Exhaust Manifold/Headers to Cylinder Head Bolts
M12 x 1.5
1
Exhaust Manifold/Headers to Cylinder Head Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Proper torque ensures a leak-free connection and optimal performance.
Exhaust
Torque specifications for Exhaust
Exhaust
Torque specifications for Exhaust
Exhaust Manifold
1 Exhaust Manifold/Headers to Engine Block Bolts
M12 x 1.5
1
Exhaust Manifold/Headers to Engine Block Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Secure the exhaust manifold/headers to the engine block, ensuring a leak-free connection and proper exhaust gas flow.
2 Exhaust Manifold/Headers to Cylinder Head Bolts
M12 x 1.5
2
Exhaust Manifold/Headers to Cylinder Head Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Attach the exhaust manifold/headers to the cylinder head, maintaining a secure connection and preventing exhaust leaks.
Exhaust Pipe
1 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M12 x 1.5
1
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Connect the exhaust pipe to the exhaust manifold/headers, ensuring a secure and leak-free connection.
2 Catalytic Converter to Exhaust Pipe Bolts
M12 x 1.5
2
Catalytic Converter to Exhaust Pipe Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Secure the catalytic converter to the exhaust pipe, maintaining a proper connection and preventing exhaust leaks.
3 Muffler to Exhaust Pipe Bolts
M12 x 1.5
3
Muffler to Exhaust Pipe Bolts
M12 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Attach the muffler to the exhaust pipe, ensuring a secure connection and proper exhaust gas flow.
Exhaust Mounting
1 Exhaust System Mounting Bracket Bolts
M14 x 1.5
1
Exhaust System Mounting Bracket Bolts
M14 x 1.5
Torque Specification
22.5 ft-lbs (30.5 N·m)
Important Notes
Estimated torque value based on general industry guidelines. Secure the exhaust system mounting brackets to the vehicle's frame or suspension components, maintaining proper exhaust system alignment and preventing damage.
2 Exhaust System Hanger Bolts
M12 x 1.5
2
Exhaust System Hanger Bolts
M12 x 1.5
Torque Specification
17.5 ft-lbs (23.75 N·m)
Important Notes
Estimated torque value based on general industry guidelines. Secure the exhaust system hangers to the vehicle's frame or suspension components, maintaining proper exhaust system alignment and preventing damage.
Heat Shield
1 Heat Shield Bolts
M10 x 1.5
1
Heat Shield Bolts
M10 x 1.5
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated torque value based on general industry guidelines. Secure the heat shield in place, protecting surrounding components from heat damage.
Oxygen Sensor
1 Oxygen Sensor Bolts
M8 x 1.25
1
Oxygen Sensor Bolts
M8 x 1.25
Torque Specification
17.5 ft-lbs (23.75 N·m)
Important Notes
Estimated torque value based on general industry guidelines. Secure the oxygen sensor in place, ensuring accurate readings and proper engine performance.
Fuel
Torque specifications for Fuel
Fuel
Torque specifications for Fuel
Fuel Rail and Injector Subsystem
1 Fuel Rail Bolts
M8 x 1.25
1
Fuel Rail Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Proper torque is essential to prevent fuel leaks and maintain engine performance.
2 Fuel Injector Bolts
M8 x 1.25
2
Fuel Injector Bolts
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Proper torque is crucial to prevent fuel leaks and maintain engine efficiency.
3 Fuel Injector Hold-Down Clamp Bolts
M6 x 1.0
3
Fuel Injector Hold-Down Clamp Bolts
M6 x 1.0
Torque Specification
1. 5 ft-lbs (7 N·m)
2. 7 ft-lbs (10 N·m)
Important Notes
Estimated torque value based on industry standards. Consult manufacturer documentation for specific recommendations.
Fuel Pump and Tank Subsystem
1 Fuel Pump Mounting Bolts
M10 x 1.5
1
Fuel Pump Mounting Bolts
M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Proper torque is essential to prevent fuel leaks and maintain engine performance.
2 Fuel Tank Strap Bolts
M12 x 1.75
2
Fuel Tank Strap Bolts
M12 x 1.75
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Proper torque is essential to prevent fuel tank damage and maintain safety.
Fuel Filter and Fittings Subsystem
1 Fuel Filter Bolt/Nut
M12 x 1.75
1
Fuel Filter Bolt/Nut
M12 x 1.75
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Proper torque is essential to prevent fuel leaks and maintain engine efficiency.
2 Fuel Line Fittings
M10 x 1.5
2
Fuel Line Fittings
M10 x 1.5
Torque Specification
1. 10 ft-lbs (14 N·m)
2. 15 ft-lbs (20 N·m)
Important Notes
Estimated torque value based on industry standards. Consult manufacturer documentation for specific recommendations.
Fuel Pressure Regulator Subsystem
1 Fuel Pressure Regulator Mounting Bolts
M8 x 1.25
1
Fuel Pressure Regulator Mounting Bolts
M8 x 1.25
Torque Specification
1. 10 ft-lbs (14 N·m)
2. 12 ft-lbs (16 N·m)
Important Notes
Estimated torque value based on industry standards. Consult manufacturer documentation for specific recommendations.
Hvac
Torque specifications for Hvac
Hvac
Torque specifications for Hvac
A/C Compressor Subsystem
1 A/C Compressor Mounting Bolts
M10 x 1.5
1
A/C Compressor Mounting Bolts
M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Proper torque ensures secure attachment to the engine block, preventing vibration and noise.
2 A/C Line Fittings
M8 x 1.25
2
A/C Line Fittings
M8 x 1.25
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Proper torque ensures a leak-free seal, maintaining refrigerant pressure and system performance.
A/C Condenser Subsystem
1 A/C Condenser Mounting Bolts
M12 x 1.5
1
A/C Condenser Mounting Bolts
M12 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value based on industry standards. Proper torque ensures secure attachment to the radiator support, preventing vibration and noise.
A/C Evaporator Subsystem
1 A/C Evaporator Mounting Bolts
M10 x 1.5
1
A/C Evaporator Mounting Bolts
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on industry standards. Proper torque ensures secure attachment to the dashboard or HVAC housing, preventing vibration and noise.
A/C Refrigerant Line Subsystem
1 A/C Refrigerant Line Clamp Bolts
M8 x 1.25
1
A/C Refrigerant Line Clamp Bolts
M8 x 1.25
Torque Specification
5 ft-lbs (7 N·m)
Important Notes
Estimated value based on industry standards. Proper torque ensures a secure attachment, preventing refrigerant leaks and system damage.
Heater Core Subsystem
1 Heater Core Mounting Bolts
M10 x 1.5
1
Heater Core Mounting Bolts
M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on industry standards. Proper torque ensures secure attachment to the dashboard or HVAC housing, preventing vibration and noise.
Suspension
Torque specifications for Suspension
Suspension
Torque specifications for Suspension
Front Suspension
1 Strut/Shock Absorber Mounting Bolts
M14 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M14 x 1.5
Torque Specification
52 ft-lbs (70 N·m)
Important Notes
Proper torque is crucial to prevent damage to the strut or shock absorber and maintain ride quality.
2 Control Arm Bolts
M16 x 1.5
2
Control Arm Bolts
M16 x 1.5
Torque Specification
66 ft-lbs (90 N·m)
Important Notes
Proper torque ensures the control arm remains securely attached and prevents damage to surrounding components.
3 Ball Joint Nut
M12 x 1.25
3
Ball Joint Nut
M12 x 1.25
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
Proper torque is essential to prevent the ball joint from coming loose, which can cause uneven tire wear and affect vehicle stability.
4 Upper Control Arm Bushing Bolts
M10 x 1.25
4
Upper Control Arm Bushing Bolts
M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Proper torque is crucial to prevent damage to the bushings and surrounding components. (Estimated value)
5 Lower Control Arm Bushing Bolts
M10 x 1.25
5
Lower Control Arm Bushing Bolts
M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Proper torque is crucial to prevent damage to the bushings and surrounding components. (Estimated value)
Steering System
1 Tie Rod End Nut
M12 x 1.25
1
Tie Rod End Nut
M12 x 1.25
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Proper torque ensures the tie rod end remains securely attached and prevents damage to surrounding components.
2 Steering Gear/Rack Mounting Bolts
M14 x 1.5
2
Steering Gear/Rack Mounting Bolts
M14 x 1.5
Torque Specification
80 ft-lbs (108 N·m)
Important Notes
Proper torque ensures the steering gear is properly secured to the subframe, maintaining proper steering alignment and preventing damage to surrounding components.
Sway Bar and Stabilizer Bar
1 Sway Bar Link Nut
M12 x 1.25
1
Sway Bar Link Nut
M12 x 1.25
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Proper torque ensures the sway bar link remains securely attached and prevents damage to surrounding components.
2 Stabilizer Bar Mounting Bolts
M10 x 1.25
2
Stabilizer Bar Mounting Bolts
M10 x 1.25
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Proper torque ensures the stabilizer bar remains securely attached and prevents damage to surrounding components. (Estimated value)
Tf 80 Transmission
Torque specifications for Tf 80 Transmission
Tf 80 Transmission
Torque specifications for Tf 80 Transmission
Transmission Mounting
1 Transmission Mounting Bolts
M12 x 1.5
1
Transmission Mounting Bolts
M12 x 1.5
Torque Specification
44 ft-lbs (60 N·m)
Transmission Oil Pan
1 Transmission Oil Pan Bolts
M8 x 1.25
1
Transmission Oil Pan Bolts
M8 x 1.25
Torque Specification
6 ft-lbs (8 N·m)
Transmission Drain And Fill
1 Transmission Drain and Fill Plugs
M14 x 1.5
1
Transmission Drain and Fill Plugs
M14 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Transmission Fluid System
1 Transmission Fluid Drain/Fill Plug
M14 x 1.5
1
Transmission Fluid Drain/Fill Plug
M14 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
2 Transmission Pan Gasket Bolts
M10 x 1.25
2
Transmission Pan Gasket Bolts
M10 x 1.25
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Estimated value based on general industry standards.
3 Transmission Filter Bolts
M8 x 1.25
3
Transmission Filter Bolts
M8 x 1.25
Torque Specification
11 ft-lbs (15 N·m)
Important Notes
Estimated value based on general industry standards.
Transmission Cooler Lines
1 Transmission Cooler Line Fittings
M12 x 1.5
1
Transmission Cooler Line Fittings
M12 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value based on general industry standards.
Tg 81 Transmission
Torque specifications for Tg 81 Transmission
Tg 81 Transmission
Torque specifications for Tg 81 Transmission
Transmission Mounting
1 Transmission Mounting Bolts
M14 x 1.5
1
Transmission Mounting Bolts
M14 x 1.5
Torque Specification
44 ft-lbs (60 N·m)
Important Notes
These bolts ensure proper alignment and prevent movement or vibration that could affect transmission performance.
Transmission Oil Pan
1 Transmission Oil Pan Bolts
M10 x 1.25
1
Transmission Oil Pan Bolts
M10 x 1.25
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
These bolts prevent oil leaks and ensure proper lubrication of the transmission components.
Transmission Fluid System
1 Transmission Drain and Fill Plugs
M12 x 1.5
1
Transmission Drain and Fill Plugs
M12 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
These plugs require proper torque to prevent leaks and ensure accurate fluid level monitoring.
2 Transmission Fluid Drain/Fill Plug
M12 x 1.5
2
Transmission Fluid Drain/Fill Plug
M12 x 1.5
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
This plug is specific to the transmission fluid system and requires proper torque to prevent leaks and ensure accurate fluid level monitoring.
Transmission Bellhousing
1 Transmission Bellhousing Bolts
M16 x 1.5
1
Transmission Bellhousing Bolts
M16 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
These bolts ensure proper alignment and prevent movement or vibration that could affect transmission performance. (Estimated value based on industry standards)
Transmission Crossmember
1 Transmission Crossmember Bolts
M18 x 1.5
1
Transmission Crossmember Bolts
M18 x 1.5
Torque Specification
66 ft-lbs (90 N·m)
Important Notes
These bolts ensure proper support and alignment of the transmission. (Estimated value based on industry standards)
Transmission Cooler Lines
1 Transmission Cooler Line Fittings
M10 x 1.25
1
Transmission Cooler Line Fittings
M10 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
These fittings require proper torque to ensure a leak-free seal. (Estimated value based on industry standards)
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
1
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
2
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
3
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the recommended torque specifications for wheel bolts on a 2010-2018 Volvo v60?
Q1
What are the recommended torque specifications for wheel bolts on a 2010-2018 Volvo v60?
Tighten wheel bolts to 140 Nm (103 lb-ft) for steel wheels and 120 Nm (89 lb-ft) for aluminum wheels.
Q2 What type of torque wrench IS recommended for tightening critical bolts on the v60?
Q2
What type of torque wrench IS recommended for tightening critical bolts on the v60?
Use a calibrated torque wrench with an accuracy of ±4% or better.
Q3 How can I convert torque values between metric and imperial units?
Q3
How can I convert torque values between metric and imperial units?
To convert from Nm to lb-ft, multiply Nm by 0.73756. To convert from lb-ft to Nm, multiply lb-ft by 1.3558.
Q4 What are the risks of over-tightening or under-tightening bolts?
Q4
What are the risks of over-tightening or under-tightening bolts?
Over-tightening can strip threads or damage components, while under-tightening can lead to loose bolts and potential safety issues.
Q5 Should I use any thread-locking compounds or lubricants on bolts?
Q5
Should I use any thread-locking compounds or lubricants on bolts?
Refer to Volvo's technical specifications for specific recommendations on thread-locking compounds and lubricants.
Q6 How often should I check and tighten critical bolts on the v60?
Q6
How often should I check and tighten critical bolts on the v60?
Follow Volvo's recommended maintenance schedule for periodic inspection and tightening of critical bolts.
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Digital Torque Wrench (10-100 Nm)
Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the v60.
- Digital display for accurate readings
- Audible alarm when target torque IS reached
- Multiple units (Nm, ft-lb, in-lb)
- Reversible ratcheting mechanism
Service Procedures
Engine Bolt Torque Specifications
Technical procedure for tightening engine bolts to specific torque values.
- Clean bolt threads and mating surfaces.
- Apply a small amount of threadlocker to bolt threads.
- Tighten bolts to specified torque using a digital torque wrench.
- Torque Values (in Nm):
- - Cylinder head bolts: 25 Nm
- - Timing belt tensioner bolt: 40 Nm
- - Intake manifold bolts: 20 Nm
- - Exhaust manifold bolts: 25 Nm
- - Oil pan bolts: 15 Nm
Suspension Bolt Torque Specifications
Technical procedure for tightening suspension bolts to specific torque values.
- Clean bolt threads and mating surfaces.
- Tighten bolts to specified torque using a digital torque wrench.
- Torque Values (in Nm):
- - Control arm bolts: 70 Nm
- - Strut bolts: 50 Nm
- - Sway bar end link bolts: 20 Nm
- - Tie rod ends: 35 Nm
- - Wheel lug nuts: 120 Nm
Technical Service Bulletins
Engine Timing Belt Tensioner Bolt Torque Specification
2012-06-15Updated torque specification for engine timing belt tensioner bolts.
2010-2018 v60
Resolution: Replace existing timing belt tensioner bolts with new bolts and tighten to 45 Nm.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
ASE
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.