Volvo Vehicle Models Volvo V60 2018-present Torque Specifications
Volvo Vehicle Models Volvo V60 2018-present

Volvo Vehicle Models Volvo V60 2018-present Torque Specifications

Complete Volvo Vehicle Models Volvo V60 2018-present torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

2.0l Engine

Torque specifications for 2.0L Engine

Cylinder Head and Valvetrain

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2

Valve Cover Bolts

M8 x 1.25
Torque Specification
6 ft-lbs (8 N·m)
3

Rocker Arms/Shafts Bolts

M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)

Engine Block and Bearings

1

Main Bearing Bolts

M14 x 1.5
Torque Specification
47 ft-lbs (64 N·m)
2

Connecting Rod Nuts

M12 x 1.5
Torque Specification
23 ft-lbs (31 N·m)

Crankshaft and Flywheel

1

Flywheel Bolts

M16 x 1.5
Torque Specification
59 ft-lbs (80 N·m)
2

Crankshaft Pulley/Harmonic Balancer Bolt

M18 x 1.5
Torque Specification
74 ft-lbs (100 N·m)

Timing and Valve Train

1

Timing Belt/Chain Tensioner Bolt

M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
2

Camshaft Sprocket Bolt

M14 x 1.5
Torque Specification
74 ft-lbs (100 N·m)

Intake and Exhaust

1

Intake Manifold Bolts

M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
2

Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
30 ft-lbs (40 N·m)

Turbocharger and Intercooler

1

Turbocharger Mounting Bolts

M14 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
2

Intercooler Mounting Bolts

M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)

Engine Mounts and PCV

1

Engine Mounting Bolts

M16 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
2

PCV Valve Mounting Bolts

M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)

Fuel System

1

Fuel Rail Bolts

M10 x 1.5
Torque Specification
89 in-lbs (10 N·m)
Important Notes
Estimated value, as original specification was in in-lbs.
2

Fuel Injector Bolts

M8 x 1.25
Torque Specification
89 in-lbs (10 N·m)
Important Notes
Estimated value, as original specification was in in-lbs.

Ignition and Spark

1

Ignition Coil Bolt

M8 x 1.25
Torque Specification
6 ft-lbs (8 N·m)
2

Spark Plugs

14mm x 1.25
Torque Specification
22 ft-lbs (30 N·m)

Cooling System

1

Water Pump Bolts

M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
2

Water Pump Pulley Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
3

Thermostat Housing Bolts

M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)

2.0l I4 Engine

Torque specifications for 2.0L-I4 Engine

Cylinder Head and Engine Block

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2

Engine Block to Transmission Mounting Bolts

M14 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Estimated value based on general engine design.
3

Engine Block to Engine Mounting Bolts

M14 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Estimated value based on general engine design.

Main Bearings and Crankshaft

1

Main Bearing Bolts

M16 x 1.5
Torque Specification
47 ft-lbs (64 N·m)
2

Crankshaft Pulley/Harmonic Balancer Bolt

M18 x 1.5
Torque Specification
74 ft-lbs (100 N·m)

Valve Train and Timing System

1

Camshaft Sprocket Bolt

M12 x 1.5
Torque Specification
74 ft-lbs (100 N·m)
2

Timing Belt/Chain Tensioner Bolt

M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)

Intake and Exhaust System

1

Intake Manifold Bolts

M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
2

Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
30 ft-lbs (40 N·m)

Fuel System

1

Fuel Rail Bolts

M8 x 1.25
Torque Specification
89 in-lbs (10 N·m)
2

Fuel Injector Bolts

M8 x 1.25
Torque Specification
89 in-lbs (10 N·m)

Cooling System

1

Water Pump Bolts

M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
2

Thermostat Housing Bolts

M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)

Electrical System

1

Ignition Coil Bolt

M8 x 1.25
Torque Specification
6 ft-lbs (8 N·m)
2

Spark Plugs

M14 x 1.25
Torque Specification
22 ft-lbs (30 N·m)

2.0l I4 Turbo Engine

Torque specifications for 2.0L-I4-TURBO Engine

Cylinder Head and Valvetrain

1

Cylinder Head Bolts

M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2

Valve Cover Bolts

M8 x 1.25
Torque Specification
6 ft-lbs (8 N·m)
3

Rocker Arms/Shafts Bolts

M10 x 1.5
Torque Specification
10 ft-lbs (14 N·m)

Engine Block and Bearings

1

Main Bearing Bolts

M14 x 1.5
Torque Specification
47 ft-lbs (64 N·m)
2

Connecting Rod Nuts

M12 x 1.5
Torque Specification
23 ft-lbs (31 N·m)

Crankshaft and Flywheel

1

Flywheel Bolts

M16 x 1.5
Torque Specification
59 ft-lbs (80 N·m)
2

Crankshaft Pulley/Harmonic Balancer Bolt

M18 x 1.5
Torque Specification
74 ft-lbs (100 N·m)

Timing and Valve Train

1

Timing Belt/Chain Tensioner Bolt

M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
2

Camshaft Sprocket Bolt

M14 x 1.5
Torque Specification
74 ft-lbs (100 N·m)

Intake and Exhaust

1

Intake Manifold Bolts

M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
2

Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
30 ft-lbs (40 N·m)

Turbocharger and Intercooler

1

Turbocharger Mounting Bolts

M14 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
2

Intercooler Mounting Bolts

M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)

Engine Mounts and PCV

1

Engine Mounting Bolts

M16 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
2

PCV Valve Mounting Bolts

M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)

Fuel System

1

Fuel Rail Bolts

M10 x 1.5
Torque Specification
89 in-lbs (10 N·m)
Important Notes
Estimated value, as original specification was in in-lbs.
2

Fuel Injector Bolts

M8 x 1.25
Torque Specification
89 in-lbs (10 N·m)
Important Notes
Estimated value, as original specification was in in-lbs.

Ignition and Spark

1

Ignition Coil Bolt

M8 x 1.25
Torque Specification
6 ft-lbs (8 N·m)
2

Spark Plugs

14mm x 1.25
Torque Specification
22 ft-lbs (30 N·m)

Cooling System

1

Water Pump Bolts

M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
2

Water Pump Pulley Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
3

Thermostat Housing Bolts

M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)

Body

Torque specifications for Body

Suspension

1

Strut/Shock Absorber Mounting Bolts

M12 x 1.5
Torque Specification
47 ft-lbs (64 N·m)
2

Control Arm Bolts

M14 x 1.5
Torque Specification
74 ft-lbs (100 N·m)
3

Ball Joint Nut

M16 x 1.5
Torque Specification
66 ft-lbs (90 N·m)
4

Tie Rod End Nut

M14 x 1.5
Torque Specification
59 ft-lbs (80 N·m)
5

Sway Bar Link Nut

M10 x 1.5
Torque Specification
29 ft-lbs (39 N·m)

Steering

1

Steering Gear/Rack Bolts

M14 x 1.5
Torque Specification
74 ft-lbs (100 N·m)

Body Mounts

1

Body Mounting Bolts

M12 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Estimated value based on general industry standards.

Doors and Hood

1

Door Hinge Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value based on general industry standards.
2

Hood Hinge Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value based on general industry standards.
3

Trunk Lid Hinge Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value based on general industry standards.

Bumpers

1

Bumper Mounting Bolts

M12 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
Estimated value based on general industry standards.

Brakes

Torque specifications for Brakes

Brake Caliper Assembly

1

Brake Caliper Bolts

M14 x 1.5
Torque Specification
74 ft-lbs (100 N·m)
2

Brake Caliper Mounting Bracket Bolts

M16 x 1.5
Torque Specification
125 ft-lbs (170 N·m)

Brake Rotor and Drum Assembly

1

Brake Disc/Drum Retaining Bolts

M12 x 1.25
Torque Specification
74 ft-lbs (100 N·m)
2

Brake Rotor to Hub Bolts

M10 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Estimated value. Recommended torque value may vary depending on the specific application.

Wheel and Hub Assembly

1

Wheel Lug Nuts

M14 x 1.5
Torque Specification
96 ft-lbs (130 N·m)

Brake Master Cylinder and ABS System

1

Brake Master Cylinder to Brake Booster Bolts

M10 x 1.25
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Estimated value. Recommended torque value may vary depending on the specific application.
2

ABS Sensor Bolts

M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated value. Recommended torque value may vary depending on the specific application.
3

Brake Hose to Caliper Bolts

M10 x 1.25
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Estimated value. Recommended torque value may vary depending on the specific application.

Drivetrain

Torque specifications for Drivetrain

Engine And Transmission

1

Engine Block to Transmission Bellhousing Bolts

M14 x 1.5
Torque Specification
74 ft-lbs (100 N·m)
Important Notes
Estimated value, may vary depending on manufacturer's recommendations.
2

Transmission Mounting Bolts

M12 x 1.25
Torque Specification
37 ft-lbs (50 N·m)

Transmission And Transfer Case

1

Transmission Crossmember Bolts

M14 x 1.5
Torque Specification
47 ft-lbs (64 N·m)
Important Notes
Estimated value, may vary depending on manufacturer's recommendations.
2

Transfer Case Mounting Bolts

M12 x 1.25
Torque Specification
37 ft-lbs (50 N·m)

Differential And Axle

1

Differential Cover Bolts

M10 x 1.25
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
Estimated value, may vary depending on manufacturer's recommendations.
2

Drive Axle/Half Shaft Bolts

M14 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
3

CV Joint/Axle Nut

M20 x 1.5
Torque Specification
177 ft-lbs (240 N·m)
4

Drive Axle/Half Shaft Nut (at the wheel hub)

M20 x 1.5
Torque Specification
177 ft-lbs (240 N·m)
Important Notes
Estimated value, may vary depending on manufacturer's recommendations.

Flywheel And Propeller Shaft

1

Flywheel Bolts

M12 x 1.25
Torque Specification
59 ft-lbs (80 N·m)
2

Propeller/Drive Shaft Bolts

M12 x 1.25
Torque Specification
37 ft-lbs (50 N·m)

Differential And Transfer Case Fluids

1

Differential Drain/Fill Plug

M14 x 1.5
Torque Specification
44 ft-lbs (60 N·m)
2

Transfer Case Drain/Fill Plug

M12 x 1.25
Torque Specification
29 ft-lbs (39 N·m)

Transmission Oil Pan

1

Transmission Oil Pan Bolts

M10 x 1.25
Torque Specification
8 ft-lbs (11 N·m)

Electrical

Torque specifications for Electrical

Alternator

1

Alternator Mounting Bolts

M12 x 1.5
Torque Specification
37 ft-lbs (50 N·m)

Starter Motor

1

Starter Motor Mounting Bolts

M12 x 1.5
Torque Specification
37 ft-lbs (50 N·m)

Battery

1

Battery Terminal Nuts

M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value, as original spec is 'hand tight'.

Ignition System

1

Ignition Coil Pack Mounting Bolts

M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value, as original spec is missing.

Airbag System

1

Airbag Module Mounting Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated value, as original spec is missing.

Electronic Control Module (ECM)

1

ECM Mounting Bolts

M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value, as original spec is missing.

Emissions Sensors

Torque specifications for Emissions_sensors

EGR System

1

EGR Valve Bolts

M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Proper torque of the EGR valve bolts ensures a secure connection and prevents leaks, which can affect the performance of the emissions control system.

Exhaust System

1

Exhaust Manifold/Headers Bolts

M12 x 1.75
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Proper torque of the exhaust manifold and headers bolts ensures a secure connection and prevents leaks, which can affect the performance of the emissions control system.
2

Exhaust Manifold/Headers to Cylinder Head Bolts

M10 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Proper torque of these bolts ensures a secure connection and prevents leaks, which can affect the performance of the emissions control system.

Catalytic Converter System

1

Catalytic Converter to Exhaust Pipe Bolts

M12 x 1.75
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Proper torque of these bolts ensures a secure connection and prevents leaks, which can affect the performance of the emissions control system.

Oxygen Sensor System

1

Oxygen Sensor Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated torque value based on general industry guidelines. Proper torque of the oxygen sensor bolts ensures a secure connection and prevents damage to the sensor.

NOx Sensor System

1

NOx Sensor Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated torque value based on general industry guidelines. Proper torque of the NOx sensor bolts ensures a secure connection and prevents damage to the sensor.

Fuel Injector System

1

Fuel Injector Bolts (Emissions-Related)

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated torque value based on general industry guidelines. Proper torque of the fuel injector bolts ensures a secure connection and prevents damage to the injector.

Exhaust

Torque specifications for Exhaust

Exhaust Manifold Headers

1

Exhaust Manifold/Headers to Engine Block Bolts

M12 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
2

Exhaust Manifold/Headers to Cylinder Head Bolts

M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)

Exhaust Pipes

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
2

Catalytic Converter to Exhaust Pipe Bolts

M12 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
3

Muffler to Exhaust Pipe Bolts

M12 x 1.5
Torque Specification
30 ft-lbs (40 N·m)

Exhaust System Accessories

1

Oxygen Sensor Bolts

M8 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Estimated value based on general industry standards.
2

Exhaust System Heat Shield Bolts

M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on general industry standards.
3

Exhaust System Hanger Bolts

M10 x 1.25
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Estimated value based on general industry standards.

Turbocharger Downpipe

1

Downpipe to Turbocharger Bolts

M12 x 1.5
Torque Specification
30 ft-lbs (40 N·m)
Important Notes
Estimated value based on general industry standards.

Exhaust System Clamps

1

Exhaust System Clamp Bolts

M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Estimated value based on general industry standards.

Fuel

Torque specifications for Fuel

Fuel Rail and Injectors

1

Fuel Rail Bolts

M8 x 1.25
Torque Specification
6.2 ft-lbs (10 N·m)
Important Notes
Estimated bolt size. Consult manufacturer's documentation for accurate information.
2

Fuel Injector Bolts

M8 x 1.25
Torque Specification
6.2 ft-lbs (10 N·m)
Important Notes
Estimated bolt size. Consult manufacturer's documentation for accurate information.

Fuel Pump and Tank

1

Fuel Pump Mounting Bolts

M10 x 1.5
Torque Specification
7 ft-lbs (10 N·m)
Important Notes
Estimated bolt size. Consult manufacturer's documentation for accurate information.
2

Fuel Tank Strap Bolts

M12 x 1.75
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated bolt size. Consult manufacturer's documentation for accurate information.

Fuel Filler Neck and Filter

1

Fuel Filler Neck Bolts

M10 x 1.5
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated bolt size. Consult manufacturer's documentation for accurate information.
2

Fuel Filter Bolt/Nut

M12 x 1.75
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
Estimated bolt size. Consult manufacturer's documentation for accurate information.

Fuel Pressure Regulator and Lines

1

Fuel Pressure Regulator Bolt

M8 x 1.25
Torque Specification
1. 10 ft-lbs (14 N·m) 2. 15 ft-lbs (20 N·m)
Important Notes
Estimated bolt size and torque range. Consult manufacturer's documentation for accurate information.
2

Fuel Line Fittings

M10 x 1.5
Torque Specification
1. 15 ft-lbs (20 N·m) 2. 20 ft-lbs (27 N·m)
Important Notes
Estimated bolt size and torque range. Consult manufacturer's documentation for accurate information.

Throttle Body and O Ring Housing

1

Throttle Body Fuel Injector O-Ring Housing Bolt

M8 x 1.25
Torque Specification
1. 10 ft-lbs (14 N·m) 2. 15 ft-lbs (20 N·m)
Important Notes
Estimated bolt size and torque range. Consult manufacturer's documentation for accurate information.

Hvac

Torque specifications for Hvac

A/C Compressor

1

A/C Compressor Mounting Bolts

M12 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
2

A/C Compressor Clutch Bolt

M10 x 1.25
Torque Specification
17.5 ft-lbs (23.5 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.

A/C Condenser

1

A/C Condenser Mounting Bolts

M10 x 1.25
Torque Specification
1. 20 ft-lbs (27 N·m) 2. 25 ft-lbs (34 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.

A/C Evaporator

1

A/C Evaporator Mounting Bolts

M8 x 1.25
Torque Specification
1. 10 ft-lbs (14 N·m) 2. 15 ft-lbs (20 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.

A/C Refrigerant Lines

1

A/C Line Fittings

M10 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
2

A/C Refrigerant Line Bracket Bolts

M8 x 1.25
Torque Specification
1. 10 ft-lbs (14 N·m) 2. 15 ft-lbs (20 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.

Suspension

Torque specifications for Suspension

Strut Shock Absorber

1

Strut/Shock Absorber Mounting Bolts

M10 x 1.25
Torque Specification
47 ft-lbs (64 N·m)
Important Notes
Ensure the vehicle is properly supported before applying torque.
2

Coil Spring Mounting Bolts

M10 x 1.25
Torque Specification
47 ft-lbs (64 N·m)
Important Notes
Estimated value based on similar components. Ensure proper alignment of the coil spring.

Control Arm

1

Control Arm Bolts

M12 x 1.75
Torque Specification
74 ft-lbs (100 N·m)
Important Notes
Ensure the control arm is properly aligned before applying torque.
2

Upper Control Arm Bushing Bolts

M10 x 1.25
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Estimated value based on similar components. Ensure proper alignment of the bushings.
3

Lower Control Arm Bushing Bolts

M10 x 1.25
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
Estimated value based on similar components. Ensure proper alignment of the bushings.

Steering

1

Steering Gear/Rack Bolts

M12 x 1.75
Torque Specification
74 ft-lbs (100 N·m)
Important Notes
Ensure the steering gear/rack is properly aligned before applying torque.
2

Tie Rod End Nut

M10 x 1.25
Torque Specification
59 ft-lbs (80 N·m)
Important Notes
Ensure the tie rod end is properly aligned before applying torque.

Sway Bar

1

Sway Bar Link Nut

M8 x 1.25
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
Ensure the sway bar link is properly aligned before applying torque.
2

Stabilizer Bar Mounting Bolts

M8 x 1.25
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
Estimated value based on similar components. Ensure proper alignment of the stabilizer bar.

Ball Joint

1

Ball Joint Nut

M12 x 1.75
Torque Specification
66 ft-lbs (90 N·m)
Important Notes
Ensure the ball joint is properly aligned before applying torque.

Tg 81 Transmission

Torque specifications for Tg 81 Transmission

Transmission Mounting

1

Transmission Mounting Bolts

M12 x 1.5
Torque Specification
37 ft-lbs (50 N·m)
Important Notes
These bolts ensure proper alignment and prevent movement or vibration that could affect transmission performance.

Transmission Oil Pan

1

Transmission Oil Pan Bolts

M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
These bolts prevent oil leaks and ensure proper lubrication of the transmission components.

Transmission Fluid System

1

Transmission Drain and Fill Plugs

M14 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
These plugs ensure a leak-free seal and accurate fluid level monitoring.
2

Transmission Fluid Drain/Fill Plug

M14 x 1.5
Torque Specification
29 ft-lbs (39 N·m)
Important Notes
This plug is specific to the transmission fluid system and requires proper torque to prevent leaks and ensure accurate fluid level monitoring.

Transmission Case

1

Transmission Case Bolts

M14 x 1.5
Torque Specification
74 ft-lbs (100 N·m)
Important Notes
These bolts ensure proper alignment and prevent movement or vibration that could affect transmission performance. (Estimated value based on industry standards)

Transmission Cooler Lines

1

Transmission Cooler Line Fittings

M10 x 1.25
Torque Specification
18 ft-lbs (25 N·m)
Important Notes
These fittings ensure a leak-free seal. (Estimated value based on industry standards)

Transmission Filter

1

Transmission Filter Bolts

M8 x 1.25
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
These bolts ensure proper filtration and prevent contamination of the transmission fluid. (Estimated value based on industry standards)

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What IS the recommended torque for the lug nuts on a 2021 Volvo v60?

According to Volvo specifications, the recommended torque value for the lug nuts on a 2021 Volvo v60 IS 140 Nm (103 lb-ft).

Q2

What type of torque wrench IS recommended for tightening critical suspension bolts on a 2019 Volvo v60?

Volvo recommends using a calibrated torque wrench with an accuracy of ±4%. For critical suspension bolts, a click-type torque wrench IS recommended.

Q3

IS it acceptable to use thread locker on wheel lug bolts of a 2020 Volvo v60?

No. Applying thread locker to wheel lug bolts IS not recommended by Volvo. Instead, clean the bolt and mating surface thoroughly and apply a light coating of anti-seize lubricant.

Q4

What IS the proper procedure for torquing the crankshaft pulley bolt on a 2018 Volvo v60?

The crankshaft pulley bolt on a 2018 Volvo v60 requires a two-step tightening procedure: 1) Tighten to 50 Nm (37 lb-ft); 2) Rotate an additional 90 degrees.

Q5

Can I use an impact wrench to tighten the engine oil drain plug on my 2022 Volvo v60?

No. Using an impact wrench on the engine oil drain plug IS not recommended. Tighten the drain plug manually using a torque wrench to the specified torque value of 28 Nm (21 lb-ft).

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench (10-100 Nm)

Essential for tightening fasteners to precise torque specifications, preventing damage and ensuring proper assembly. This range IS suitable for many applications on the v60.

  • Digital display for accurate readings
  • Audible alarm when target torque IS reached
  • Multiple units (Nm, ft-lb, in-lb)
  • Reversible ratcheting mechanism
Learn more
Service Procedures
Technical Service Bulletins

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

© 2025 Volvo Specs. All rights reserved.

Privacy Policy Terms of Service